1:48 F-22 Raptor 600 gallons fuel tanks

Reskit F-22 Raptor - 600 gallon external fuel tanks 1:48 is a resin set of underwing tanks for models of the F-22 fighter. It is not a kit of an aircraft but an accessory for a model you have already bought.

Scale1:48
Manufacturer Reskit
Product EAN8591111905251

Responsibility details are not available.

17.56 € 13.16 €
10.88 € without VAT
−25 % You save 4.40 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Reskit F-22 Raptor - 600 gallon external tanks, 1:48

A resin detail set from the Reskit brand in 1:48 scale. It brings underwing external fuel tanks of 600 gallons capacity, which the F-22 carries on long-distance transits. It is not a model of an aircraft - it is an accessory intended to be hung on the pylons of a plastic Raptor kit.

The real subject

The Lockheed Martin F-22 Raptor is an American fifth-generation fighter with a markedly reduced radar signature. It carries its weapons in internal bays so as to keep the clean shape of the airframe, and it can fly at supersonic speed without the use of afterburning. It is precisely because of the stealth configuration that external tanks are not carried in combat use - they are hung on the underwing pylons for transfers and transits, when range outweighs low observability. A model with the tanks therefore looks credible above all on machines captured on a transit or on the ramp.

Building and painting tips

Wash the resin parts in lukewarm water with detergent, so that no release agent from the mold stays on them. Cut the casting blocks off with a saw, and do the sanding wet and with protection for your airways. Glue the tanks with cyanoacrylate glue, and with larger parts the gel variant proves itself, as it gives time to line things up. Before gluing, check that both tanks hang at the same height and parallel to the axis of the fuselage - any asymmetry is immediately visible on a finished model. In color the tanks usually follow the gray camouflage shade of the airframe; evening the tone out is helped by a light pass of spray after gluing.

Who the set is for

  • Builders of the F-22 in 1:48 scale who want a model in transit configuration
  • Modelers working with resin and cyanoacrylate glue
  • Those looking for a striking change of silhouette without rebuilding the airframe
  • Completing a kit with hung equipment

The set is supplied unassembled and unpainted. The basic kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a set of external fuel tanks for an F-22 kit in 1:48 scale that you have already bought.

Go by the photograph of the product and the manufacturer's data on the packaging.

As a rule no. External stores worsen low observability, so the tanks serve mainly for transits over long distances.

Cyanoacrylate glue, ideally the gel kind - it gives time to line the tanks up accurately under the wing.

Last seen

1:48 F-22 Raptor 600 gallons fuel tanks-25 %Stock ClearanceFavorite
ReskitRSU48-01981:48

1:48 F-22 Raptor 600 gallons fuel tanks

Reskit F-22 Raptor - 600 gallon external fuel tanks 1:48 is a resin set of underwing tanks for models of the F-22 fighter. It is not a kit of an aircraft but an accessory for a model you have already bought.
3 leftof 6
17.56 €13.16 € You save 4.40 €
Eureka XXLER-72111:72

1:72 Towing cable for T-34/76 Tank & SU-85/100/122 SPGs

A tow cable for the T-34/76 and SU-85/100/122 is a diorama accessory in 1:72 scale from Eureka XXL. It is not a model but a tow cable set for improving Soviet vehicles.
In stock
4.36 €
OmaskOMK740161:48

1:48 Hurricane Mk II wheel bay mask (for Arma Hobby)

An Omask painting mask for the landing gear bay of the Hurricane Mk II in 1:48 scale makes it easier to paint the gear bays cleanly without overspray. Intended for the Arma Hobby kit.
In stock
2.76 €
1:48 Grumman F-14A Tomcat closed exhaust nozzles-25 %Stock ClearanceFavorite
ReskitRSU48-00801:48

1:48 Grumman F-14A Tomcat closed exhaust nozzles

Replacement exhaust nozzles in the closed position for a model of the Grumman F-14A Tomcat in 1:48 scale. They replace the simplified parts from the kit.
3 leftof 4
18.76 €14.08 € You save 4.68 €
CMKF483611:48

1:48 North-American P-51D Mustang Pilot ETO, Seated

1:48 North-American P-51D Mustang Pilot ETO, Seated is a resin figure of a seated pilot for the cockpit of a Mustang.
In stock
10.36 €
AiresAIR20771:32

1:32 F104G Starfighter exhaust nozzle

The resin detail set Aires F-104G Starfighter exhaust nozzle in 1:32 scale brings a faithful exhaust nozzle. It is not an aircraft model but an accessory for a kit.
In stock
16.80 €
Kits-WorldKW722021:72

1:72 F-4J Last Japanese Phantoms

A 1:72 sheet devoted to the end of service of the Japanese Phantoms. It carries the markings of machines of the 302nd Squadron with the fuselage numbers 77-8399 and 07-8438 and recalls the forty-five years the type served in Japan.
In stock
13.56 €
Voyager ModelPE351124A1:35

1:35 WWII German Pz.Kpfw.IV Ausf.F1(LateProduction)Basic(For TAMIYA 35374)

A Voyager Model photo-etched set for the Pz.Kpfw.IV Ausf.F1 of late production in 1:35 scale, cut for the Tamiya 35374 kit. An accessory to a plastic model, not a kit.
In stock
31.96 €
Black Dog modelBDF321461:32

1:32 Japanese fighter pilot WW II N°4

Black Dog Japanese fighter pilot WW II No. 4, 1:32 is a resin figure of a Japanese fighter pilot of the Second World War for completing a model of an aircraft in 1:32 scale.
In stock
14.36 €
New WareNWAM05491:72

1:72 Mask F-104 J/G/S,CF-104 Starfighter EXPERT

New Ware 1:72 Mask F-104 J/G/S, CF-104 Starfighter EXPERT is a set of machine pre-cut kabuki masks for F-104 Starfighter models. The EXPERT level masks the glazing from both sides and the landing gear wheels.
In stock
5.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.