1:48 Fw 190 A-2/A-3

1:48 Fw 190 A-2/A-3 is an Omask masking set for models of the Focke-Wulf Fw 190 fighter in the A-2 and A-3 versions in 1:48 scale. It is neither a kit nor decals.

Scale1:48
Manufacturer Omask
Product EAN8591111000000

Responsibility details are not available.

3.56 €
2.94 € without VAT
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A masking set for the Focke-Wulf Fw 190 A-2 and A-3 in 1:48 scale

Masking sets are supplied as pre-cut self-adhesive templates that are stuck onto the model and cover the areas that are to stay free of paint. It is neither a kit nor a sheet of decals. The typical use is covering the glazing and the frames of the canopy, where masking by hand with tape takes hours and still does not give such a sharp transition. The set is intended for the early versions of the Fw 190 in 1:48 scale.

The real subject

The Focke-Wulf Fw 190 was a single-engine fighter aircraft with a radial engine, a wide landing gear track and a teardrop canopy with a good view. The A-2 and A-3 versions were among the early production variants and differed above all in the form of the engine and the composition of the armament. The shape of the canopy is characteristic of these versions, and during the build it is precisely the canopy that decides how the model comes across, so it pays to unmask it cleanly.

How to use the masks

The surface of the model has to be clean and degreased, otherwise the mask will not hold and paint will creep under it. Peel the individual pieces off with tweezers or the tip of a scalpel, lay them in place and press them down with a cotton swab, especially carefully all the way around the frame. Spray the paint in several thin coats; a thick coat will form a ridge on the edge that stays visible once the mask is removed. The first coat should be in the color of the inside of the frames, and only then comes the outer shade. Take the mask off shortly after drying, not after several days, when the adhesive has usually cured.

Who the set is for

  • Builders of Fw 190 models in the A-2 and A-3 versions in 1:48 scale
  • Modelers who want sharp edges on the frames without laborious masking with tape
  • Beginners who do not get on with masking glazing by hand
  • Those who build several models of the same type and save time

The package contains only the masks. The model, paints and glue are not included, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. The package contains only masks for a kit in 1:48 scale you have already bought.

Typically the glazing and the frames of the canopy. The exact extent of the masks in this package is stated on the box of the set.

Shortly after the paint has dried. After a longer time the adhesive cures and the mask may pull the finish off.

The target kit is stated on the box and in the manufacturer's description. Please check the match with the model you are building beforehand.

Last seen

OmaskOMK240011:48

1:48 Fw 190 A-2/A-3

1:48 Fw 190 A-2/A-3 is an Omask masking set for models of the Focke-Wulf Fw 190 fighter in the A-2 and A-3 versions in 1:48 scale. It is neither a kit nor decals.
In stock
3.56 €
ŘOP o.s.F1000/0041:1000

1:1000 MO-S19 ,,Alej,,

A card kit in 1:1000 scale of the MO-S19 Alej Czechoslovak infantry casemate. A faithful paper model of First Republic fortification.
In stock
4.36 €
AiresAIR42061:48

1:48 Me 262A Schwalbe slots

Me 262A Schwalbe slots 1:48 (Aires) is a resin detail set of leading-edge slats for a model of the German Messerschmitt Me 262 jet fighter. It is not a model, but an accessory for more experienced modelers.
In stock
10.80 €
GunzeS075

S075 Metallic Red - (Metallic) Spray

Gunze Mr.Color Spray S075 Metallic Red is a ready-made metallic lacquer in an aerosol spray, 40 ml. A saturated metallic red with a fine metal sparkle for custom finishes.
In stock
9.16 €
1:72 F-15DJ Eagle Aggressor-25 %Stock ClearanceFavorite
HasegawaHA024031:72

1:72 F-15DJ Eagle Aggressor

Hasegawa F-15DJ Eagle Aggressor 1:72 is an injected plastic kit of the two-seat version of the Japanese fighter in the colors of an aggressor squadron.
Last one!of 6
29.96 €22.48 € You save 7.48 €
ETA dioramaETA2111:35

1:35 Zombie - Missing People

Zombie - Missing People 1:35 is a printed paper accessory for a diorama from ETA diorama with motifs of missing person notices. It is not a kit or a waterslide decal.
In stock
3.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.