1:48 GBU-31 JDAM with Thermal Protection, BLU-109 Warhead (4pcs)

1:48 GBU-31 JDAM with Thermal Protection, BLU-109 Warhead (4pcs)

15.88 €
Add to Cart

1:48 GBU-31 JDAM with Thermal Protection, BLU-109 Warhead (4pcs)

Four pieces of the GBU-31 JDAM guided bomb with the BLU-109 penetrating warhead in 1:48, in the version with thermal protection. A store for models of modern combat aircraft.

Scale1:48
Manufacturer AMMO of Mig Jimenez
Product EAN4591111277689

Responsibility details are not available.

21.16 € 15.88 €
13.12 € without VAT
−25 % You save 5.28 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The GBU-31 JDAM is not a separately developed bomb but a bomb body fitted with a guidance kit. That consists of a tail section with movable control surfaces and of side strakes that stabilize the bomb in flight. It is guided by an inertial unit with satellite navigation input: after release the bomb heads for a previously entered point by itself and the aircraft does not have to keep tracking or illuminating it. The BLU-109 warhead is a penetrating body of the 2000 lb weight class with a thick-walled casing, meant first to pass through a hardened structure and only then to take effect inside.

What the set contains

Four pieces of this bomb in 1:48, in the version with thermal protection of the body. The set suits being hung under the wing or under the fuselage of a model, but it will also serve in a weapons-loading scene where the ordnance lies on a trolley beside the aircraft.

Building and painting tips

Cut excess material away with a sharp blade a little from the part and sand the remainder carefully, so that the cylindrical shape of the body is preserved. The parts are not made of polystyrene and ordinary plastic cement has no effect on them; use cyanoacrylate glue. Wash and degrease them before painting, otherwise the paint holds badly. When hanging them, watch that the axis of the bomb stays parallel with the axis of the aircraft and that all four pieces hang alike; a crooked store shows on a finished model more than anything else. The particular procedure for preparing the parts is given in the manufacturer's instructions.

Who it is for

For builders of modern combat aircraft who can use a more convincing store than the kit offers, and for those who build a scene with a ground crew. The model itself, the paints and the glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

According to the name, four pieces in 1:48. Whether they are supplied together with mounting adapters is given in the manufacturer's instructions for the set.

The parts are not made of polystyrene, so plastic cement has no effect on them. Use cyanoacrylate glue and degrease the bonded surfaces beforehand.

It is a penetrating body of the 2000 lb weight class with a thick-walled casing. It is meant to pass through a hardened structure and take effect only inside the target.

Models of modern combat aircraft in 1:48 that carry this ordnance. Check compatibility with the pylons of a particular kit against its dimensions.

Last seen

1:48 GBU-31 JDAM with Thermal Protection, BLU-109 Warhead (4pcs)-25 %Stock ClearanceFavorite
AMMO of Mig JimenezA.MIG-110151:48

1:48 GBU-31 JDAM with Thermal Protection, BLU-109 Warhead (4pcs)

Four pieces of the GBU-31 JDAM guided bomb with the BLU-109 penetrating warhead in 1:48, in the version with thermal protection. A store for models of modern combat aircraft.
4 leftof 5
21.16 €15.88 € You save 5.28 €
HGWHGW2329061:32

1:32 F4U-1A VF-17 "Jolly Rogers" - Part 2

HGW 1:32 F4U-1A VF-17 Jolly Rogers, part 2 is a set of wet transfers with the markings of the American carrier fighter Corsair. It follows on from the first part of the series.
In stock
14.36 €
Border ModelBT-0061:35

1:35 Pz.Beob.Wg. IV Ausf. J w/Commander&Infantry

The Pz.Beob.Wg. IV Ausf. J in 1:35 scale is a Border Model plastic kit - an artillery observation vehicle on the chassis of the Pz.Kpfw. IV with figures of a commander and infantry added.
In stock
47.96 €
ReskitRSU32-01361:32

1:32 AH-1G 'Cobra' Gearbox With Doors For ICM Kit (3D Printed)

AH-1G Cobra gearbox with doors is a 3D-printed resin set for experienced modelers which adds a detailed main gearbox of the attack helicopter to the ICM kit in 1:32 scale.
In stock
43.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.