1:48 K5Y Willow seats

1:48 K5Y Willow seats from Aires is a set of resin seats for the cockpit of the Japanese K5Y training biplane in 1:48 scale.

Scale1:48
Manufacturer Aires
Product EAN8701111000001

Responsibility details are not available.

12.80 €
10.58 € without VAT
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Seats for the K5Y Willow 1:48 (Aires)

This is a detail accessory, not a model of an aircraft. The set replaces the seats from a plastic kit of the K5Y trainer in 1:48 scale with resin castings. The exact number of pieces in the package is stated on the box.

Why seats in particular on a training biplane

The K5Y was a Japanese training biplane of the 1930s with two open positions one behind the other, under the Allied designation Willow. An open cockpit is both an opportunity and a trap for the modeler: the interior is in view from above along its whole length and anything simplified inside is apparent at once. The seat is meanwhile the most conspicuous item in a cockpit of this kind, because it has no canopy above it that would partly hide it. Injection-molded plastic runs into the limits of the technology here: the shell of the seat must have a noticeable thickness because of the mold, and lightening holes or a frame can only be suggested by engraving. A resin casting can manage a thin wall and an openwork structure, so the seat looks like a real piece of equipment rather than a solid block.

Working with resin

The seats tend to be cast on a common casting block. Separate them with a fine-toothed saw and work patiently, as the thin edges cannot be nipped off and crack under force. Level the remains of the block with a file and try the surface dry against the cockpit floor. Wash the casting beforehand in warm water with detergent, so that the mold release agent disappears. Glue with cyanoacrylate; for accurate seating it suits to apply a drop on the point of a toothpick rather than straight from the bottle. Sand only wet and with your breathing protected. Given that the seat will be permanently on show in an open cockpit, it pays to paint it separately off the model and set it inside only once finished.

Who the set is for

  • Builders of Japanese trainers in 1:48 scale.
  • Modelers who detail open cockpits, where the interior is permanently in view.
  • Anyone after a quick improvement in looks without rebuilding the whole interior.
  • Those with basic experience of separating resin castings.

This is an accessory, not a kit. The base model, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The real subject had two positions one behind the other. The exact number of pieces is stated on the box.

It is not. It is an accessory that replaces parts in a K5Y kit in 1:48 scale that you have already bought.

With a fine-toothed saw or a cutting disc. Nippers break resin and will chip the thin edges off.

Yes, warm water with detergent removes the residue of mold release agent, on which paint would not hold.

Last seen

AiresAIR48621:48

1:48 K5Y Willow seats

1:48 K5Y Willow seats from Aires is a set of resin seats for the cockpit of the Japanese K5Y training biplane in 1:48 scale.
In stock
12.80 €
EduardBIG331451:35

1:35 Bf 109G-6

Eduard 1:35 Bf 109G-6 is a combined package of photo-etched parts, steel belts and masking templates for refining a model of the Messerschmitt Bf 109 G-6 fighter in 1:35 scale.
In stock
29.80 €
EduardED354171:35

1:35 Kettenkraftrad

Eduard 1:35 Kettenkraftrad is a photo-etched detail set for refining plastic models of the German Sd.Kfz.2 Kettenkrad half-track motorcycle in 1:35 scale. It is an accessory, not a standalone model.
In stock
9 €
Green Stuff WorldGSW8831

produkt-GSW8831

A modeling item listed under the product code GSW8831. Closer details about the contents of the package and about its use are to be found on the packaging and in the manufacturer's instructions.
In stock
4.76 €
AiresAIR49461:48

1:48 A-10 C Thunderbolt II - Electronic Bay (for Academy Kits)

Aires 1:48 A-10 C Thunderbolt II - electronic bay is a resin detail set of the avionics bay for a model of the A-10 Thunderbolt II attack aircraft. Intended for the Academy kit.
In stock
10.80 €
Aires/AerobonusAER3201951:32

1:32 Modern NATO Fighter Pilot (1 Figure)

A figure of the pilot of a present-day fighter aircraft of the NATO armed forces in 1:32 scale. The package holds one figure in full flight gear, meant to be painted.
In stock
11.20 €
17ml German Grey Beige-25 %Stock ClearanceFavorite
AK interactiveMC226

17ml German Grey Beige

AK Interactive German Grey Beige 17ml is an opaque gray-beige acrylic from the 3rd Generation line by AK, thinnable with water, for brush as well as airbrush.
Last one!
3 €2.24 € You save 0.76 €
Aires/QuickboostQB725771:72

1:72 Su-34 fullback correct radome

Quickboost 1:72 Su-34 Fullback correct radome is a resin accessory with the correct nose shape for Su-34 Fullback models.
In stock
6.36 €
AK interactiveAK9173

LEAVES PUNCH LIME

Leaves Punch Lime is a modeling punch with a die in the shape of a lime leaf. With it you punch your own miniature leaves for trees on a diorama out of thin colored material.
In stock
9.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.