Masks for spraying the control surfaces of a Bf 109E model in the E-1, E-3, E-4 and E-7 versions in 1:48 scale, cut for the Hasegawa kits.
Responsibility details are not available.
The Messerschmitt Bf 109E, commonly given under the designation Me 109 as well and known among modelers as the Emil, is the version of the German fighter from the beginning of the Second World War. It is recognized by the squarely ended wing and the angular cockpit glazing. The individual sub-versions differed mainly in the armament in the wing and in equipment, and the E-7 version could carry a pylon under the fuselage. The ailerons, the elevator and the rudder had fabric covering over a metal structure, so they differed from the smooth metal of the surrounding skin.
The masks define the outlines of the control surfaces so that they can be sprayed separately and set apart optically from their surroundings on a finished model. The cut covers the E-1, E-3, E-4 and E-7 versions and is prepared for the Bf 109E kits from Hasegawa in 1:48 scale.
Dry, clean and degrease the surface before applying a mask. Press the edges down with a blunt toothpick so that paint does not get under the mask, and spray in several thin coats. Take the mask off shortly after spraying, while the finish has not hardened completely, and pull it back over itself at a sharp angle. Keep the difference of shades fine; the aim is to suggest a different surface, not to draw new parts onto the aircraft.
For modelers who build the Bf 109E in 1:48 scale and want to take a finished model further with no cutting and filling. The kit, paints and glue are not part of the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
