1:48 MiG-23BN early exhaust nozzle - opened

MiG-23BN early exhaust nozzle - opened is a resin detail accessory in 1:48 from the Czech manufacturer Aires. It replaces the simplified exhaust nozzle of a plastic model with a faithful copy of the early nozzle in the open position.

Scale1:48
Manufacturer Aires
Product EAN8591111645102

Responsibility details are not available.

20.80 €
17.19 € without VAT
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

MiG-23BN early exhaust nozzle - opened 1:48 (Aires)

This is a detail accessory of cast resin, not a kit of an aircraft. The content is a replacement engine exhaust nozzle for a model of the MiG-23BN in 1:48, made in the open position and with a worked-out inner structure that injected plastic usually only suggests. Aires is a Czech manufacturer of modeling accessories and its resin castings are among the most finely made on the market.

The real subject

The MiG-23BN is the ground-attack and fighter-bomber version of the Soviet MiG-23 with a variable-geometry wing. It differs from the fighter versions in the shape of the nose and in the equipment for attacking ground targets. The engine exhaust nozzle with afterburner is among the most noticeable places on a model: it is made up of an array of moving petals that change the cross-section according to the engine setting. The designation of the early version refers to the earlier pattern of nozzle, which differs from the later one in the shape and division of the petals.

Usage tips

First wash the resin part in lukewarm water with detergent to remove any mold release agent; otherwise the paint will not hold. Cut the casting block off with a fine saw or a snap-off knife, and never break it off by force. Sand wet and with your airways protected, as resin dust is not to be inhaled. Gluing is done with super glue, that is cyanoacrylate; classic plastic cement has no effect on resin. Dry-fit before gluing and if need be adjust the mating surface, as a little fitting is usual with accessories from a manufacturer other than the one that made the base model. The inside of the nozzle looks best after a metal shade is sprayed on and it is slightly darkened with a sooty wash toward the outlet.

Who the accessory is for

  • Modelers who want an accurate and deep exhaust nozzle on a MiG-23 model.
  • Builders with experience of resin and super glue.
  • Competition builds where the view into the nozzle is also judged.
  • Improving an older plastic model with a simplified nozzle.

The accessory is supplied unassembled and unpainted. The base model, glue and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a detail accessory, a replacement exhaust nozzle in resin. The base plastic model has to be bought separately.

With super glue based on cyanoacrylate. Ordinary plastic cement does not bite into resin and will not hold.

Traces of mold release agent stay on the casting. Without washing in lukewarm water with detergent the paint takes badly and peels off.

The versions differ in the shape and division of the nozzle petals. This part represents the early pattern, so check which version your model calls for before buying.

Last seen

AiresAIR47581:48

1:48 MiG-23BN early exhaust nozzle - opened

MiG-23BN early exhaust nozzle - opened is a resin detail accessory in 1:48 from the Czech manufacturer Aires. It replaces the simplified exhaust nozzle of a plastic model with a faithful copy of the early nozzle in the open position.
In stock
20.80 €
AiresAIR40741:48

1:48 MiG-29A Fulcrum cockpit set

The resin Aires MiG-29A Fulcrum cockpit set in 1:48 scale. A resin cockpit replacement for a model of the Soviet frontline fighter. A detail set, not a model.
In stock
16.80 €
ETA dioramaETA19431:35

1:35 WWII PROPAGANDA POSTERS - sticker

Second World War propaganda posters as stickers, 1:35 is a set of printed self-adhesive posters for dioramas in 1:35 scale.
In stock
3.96 €
AiresAIR48841:48

1:48 F/A-18E/F Super Hornet wheel bay

Aires 1:48 F/A-18E/F Super Hornet - wheel bay is a resin set that replaces the shallow landing gear bay of a plastic kit of the Super Hornet in 1:48 scale.
In stock
20.80 €
77propellerPRP70321:48

1:48 Luftwaffe Wheel Chocks Variant B - Teeth in OPEN Position (4 pcs / 3D-Printed)

Luftwaffe wheel chocks - Variant B with the teeth in the open position (1:48) is a set of four 3D printed resin chocks from 77propeller.
In stock
11.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.