Quickboost 1:48 MiG-23MF Remove Before Flight covers: resin covers and plugs with warning tags for the MiG-23MF model in 1:48 scale.
Responsibility details are not available.
A set of resin covers and plugs with Remove Before Flight tags from the Quickboost brand (a range of the Czech manufacturer Aires) for the model of the MiG-23MF fighter in 1:48 scale. The small red tags scattered over the airframe are exactly the detail a viewer stops at: they tell you the machine is secured between flights, and they contrast beautifully with a bare metal gray finish as well as with camouflage. They go superbly with the intake covers to make up a fully buttoned-up machine.
The MiG-23MF was the export fighter variant of the MiG-23 with a variable-geometry wing; the Czechoslovak Air Force took it on in the second half of the 1970s, and the machines served there until the early 1990s. The ground crew protected the pitot-static sensors, the probes and the openings of a parked machine with covers carrying warning tags that had to be removed, and that is where their internationally familiar name comes from.
Separate the very fine castings with a razor saw and glue them with the tip of a toothpick using a minimum of super glue. Paint the tags a deep red and lighten the edges slightly; a slight bend in each tag in a different direction looks lively. Fit the covers only onto a completely finished model, after the clear coat and the decals.
This is an accessory set: the model of the airplane, the glue and the paints are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
