A set of masking templates for the Su-17UM3 Fitter-G in 1:48 scale from New Ware, cut from kabuki paper; the level of the set, EXPERT, is given in the name.
Responsibility details are not available.
An accessory for a model, not a kit of the aircraft. The set contains pre-cut masking templates for the Su-17UM3 in 1:48 scale, cut from kabuki paper, that is, thin Japanese tape with a weak adhesive. It conforms well to curves, holds a crisp paint edge and leaves no sticky residue when removed. The level of the set is part of the name and determines the extent of the masking; check the exact list of templates on the box of the set.
The Su-17UM3 is the two-seat trainer and combat variant of the Soviet Su-17 fighter-bomber, that is, of the type with a variable-geometry wing. The NATO code for this version is Fitter-G. Two cockpits one behind the other, and with them longer glazing, mean more frames to mask for a modeler; pre-cut templates therefore save appreciably more work on this subject than on single-seat machines.
Degrease the surface before sticking the masks on and let the base color dry perfectly. Move the templates with tweezers and press them down with a blunt tool all the way round. Apply the paint with an airbrush in several thin coats and spray perpendicularly rather than at a shallow angle, otherwise the paint will seep under. Take the mask off shortly after the paint has dried, slowly and at a shallow angle toward yourself. With the glazing, do not forget the order of work: the interior and the cabin frame first, and only then gluing the part into the fuselage.
This is an accessory for a model, not a kit. The model itself, paints and glue are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
