LAST CHANCE! 20% OFF Ends Tonight!
10.36 €

1:48 Su-33 Flanker-D ADVANCED kabuki masks

1:48 Su-33 Flanker-D ADVANCED kabuki masks from New Ware are masking templates cut from yellow Japanese paper for painting a model of the carrier-based Su-33. The middle grade of the set, not a kit.

Scale1:48
Manufacturer New Ware
Product EAN8591111000000

Responsibility details are not available.

10.36 €
8.56 € without VAT
Out of stock – can be reserved
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Masking set 1:48 Su-33 Flanker-D, ADVANCED grade, New Ware

The middle grade of a masking set in 1:48 scale from New Ware. This is neither a kit nor a model of the aircraft but an accessory for painting. The templates are cut from Japanese kabuki paper, that is, from thin washi paper with a gentle adhesive, which adapts well to rounded surfaces and leaves no residue behind when removed. The ADVANCED grade lies between the smaller BASIC and the most extensive EXPERT, and both of those variants are available for the same subject.

The real subject

The Su-33 is a carrier fighter derived from the Su-27 and adapted for operation from a ship's deck. It received folding wings, canard foreplanes, a strengthened landing gear and an arrestor hook. Typical of it are the large cockpit canopy, the pair of engines separated by a flat center fuselage and the large tail surfaces. The designation Flanker-D comes from the NATO code system. The framing of the cockpit and a row of smaller transparencies make masking this type by hand a slow job, which a pre-cut set shortens markedly.

Usage tips

Degrease the surface and let it dry. Lift the individual masks with tweezers, seat them accurately and press the edge down with a toothpick. Apply the paint in thin coats perpendicular to the masked edge, not at an angle under it. A proven procedure is to spray the edge with the shade of the base first, so that any leak is filled with the same color, and only then to apply the target shade. Take the mask off shortly after it has dried.

Who the set is for

  • Modelers who want a greater extent of masking than in the basic grade
  • Builders of modern carrier aircraft in 1:48 scale
  • Airbrush users who are bothered by the slow cutting of tape
  • Those who build a model for a display case and want sharp, clean transitions

This is an accessory for painting, not a kit. Paints, glue and the model are not included in the package. Check before you buy that the set matches the kit you want to use it on.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. These are purely masking templates for painting, and the model and paints are not part of it.

At New Ware it is the middle extent of masking between the BASIC and EXPERT grades.

The target kit is stated on the box of the set. The masks are cut for a particular kit, so check the match before you buy.

Kabuki masks are intended for a single use. Once removed they lose both their shape and their grip.

Last seen

1:48 Bf-110 G-2/R-1 - conversion set for MON/REV
-20 %
Favorite
CMKCMK40791:48

1:48 Bf-110 G-2/R-1 - conversion set for MON/REV

CMK Bf-110 G-2/R-1, conversion set 1:48 is a resin set which converts a model of the heavy fighter into the variant with heavy underfuselage armament.
In stock
15.16 €12.13 € You save 3.03 €
LOCK 'N LOAD - Weathering Rechargable Technical Pencil
-20 %
Favorite
AMMO of Mig JimenezA.MIG-8349

LOCK 'N LOAD - Weathering Rechargable Technical Pencil

LOCK 'N LOAD - Weathering Rechargable Technical Pencil from AMMO of Mig Jimenez is a refillable technical pencil for weathering effects, for bringing out edges and rivets and for metallic effects.
In stock
25.16 €20.13 € You save 5.03 €
LukgraphLGH32-531:32

1:32 Curtiss Jenny JN-4

A kit of the American Curtiss JN-4 Jenny training biplane in 1:32 scale.
In stock
159.96 €
Top StudioTD231671:12

1:12 Clutch for 2006 RC211V

A clutch detail in 1:12 scale from Top Studio for a model of the Honda RC211V of the 2006 season. A replacement for the plastic part on the side of the engine for the last season of the machine, it is not a kit.
In stock
13.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.