Ta 183 air intake and front wheel well 1:48 is a resin accessory from the Aires/Quickboost brand for a model of the project Ta 183 jet aircraft. It is not a stand-alone model.
Responsibility details are not available.
A resin accessory taking in the air intake and the front landing gear well for a model of the Focke-Wulf Ta 183 aircraft. The cast parts sharpen up the engine intake and the space for the nose wheel, which are among the details in view on a model. It is an accessory, not a complete kit.
The Focke-Wulf Ta 183, nicknamed Huckebein, was a project for a jet fighter from the end of the Second World War. It was planned with a swept wing and a nose air intake to the jet engine. It stayed at the design stage and was not built in series, so a model shows a project subject.
Wash the parts free of mold release residue, cut off the casting blocks and sand the surfaces. Glue with super glue (cyanoacrylate). It is a good idea to paint the inner surfaces of the intake and the wheel well before closing the fuselage.
This is a resin accessory for advanced modelers. The base model, the glue and the paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
