1:48 Tornado IDS Italian version interior 3D decals (with 3D-printed resin parts)

1:48 Tornado IDS Italian version interior 3D decals (with 3D-printed resin parts)

30.56 €
Add to Cart

1:48 Tornado IDS Italian version interior 3D decals (with 3D-printed resin parts)

Quinta Studio 1:48 Tornado IDS Italian - interior 3D decals with 3D-printed resin parts. The full variant of the set for the cockpit of the Italian Tornado.

Scale1:48
Manufacturer Quinta Studio
Product EAN8691111783594

Responsibility details are not available.

40.76 € 30.56 €
25.26 € without VAT
−25 % You save 10.20 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Tornado IDS of the Italian version - interior 3D decals with resin parts, 1:48

This item is an accessory for the cockpit, not a kit of an aircraft. The basis is formed by 3D-printed and pre-painted decals which are applied onto the plastic parts of the cockpit and give the instrument panel and the consoles relief and color. According to the name the set is supplemented with 3D-printed resin parts, so this is the fuller form: for the same aircraft the manufacturer also makes a smaller variant supplied on decal paper.

Why reach for the full set

The resin parts deal with the places where a flat decal runs up against its limits: prominent blocks of instruments, levers and other elements that are meant to have volume. The combination of the two technologies gives the cockpit a depth comparable with a photo-etched set, but without the need to bend metal and paint dial faces.

The real subject

The Panavia Tornado is a two-seat combat aircraft with a variable-geometry wing, which arose from a joint program of Great Britain, Germany and Italy. The IDS version served as a strike and reconnaissance machine; the Aeronautica Militare operated it for long decades. The cockpits of the Italian, German and British machines differ in equipment and in lettering, which is why the manufacturer offers sets for the individual national forms separately.

Usage tips

Wash the resin parts in lukewarm water with detergent, cut the print supports off with a thin saw and glue them with cyanoacrylate. Protect your airways when sanding resin. Paint the areas under the decals in a dark base and coat them with gloss clear coat; then move the motif with a soft brush and on shaped areas simply press it down; do not use a softener or a setting solution. At the end unify the whole interior with matte varnish.

Who the set is for

  • Builders of Italian Tornados in 1:48 scale who want the maximum of detail
  • Modelers used to working with resin and cyanoacrylate
  • Those who build a model with the canopy slid back
  • Those interested in an alternative to photo-etched interior sets

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

This one, according to the name, additionally contains 3D-printed resin parts; the other variant is described as a form on decal paper.

Do not count on it. The set is intended for the Italian form, which has the cockpit equipped differently.

It is not, it is an additional interior set for a plastic Tornado kit.

Wash the print resin residue off, cut the print supports off and glue with cyanoacrylate. Modeling cement for plastic does not work.

Last seen

1:48 Tornado IDS Italian version interior 3D decals (with 3D-printed resin parts)-25 %Stock ClearanceFavorite
Quinta StudioQD+482621:48

1:48 Tornado IDS Italian version interior 3D decals (with 3D-printed resin parts)

Quinta Studio 1:48 Tornado IDS Italian - interior 3D decals with 3D-printed resin parts. The full variant of the set for the cockpit of the Italian Tornado.
2 leftof 3
40.76 €30.56 € You save 10.20 €
ArmoryARAW723641:72

1:72 CH-46 Sea Knight wheels w/ weighted tyres

CH-46 Sea Knight wheels (weighted), 1:72 is a resin detail set from Armory with exact landing gear wheels and simulated tire loading for a model of this shipboard helicopter.
In stock
6.76 €
LukgraphLGH32-661:32

1:32 Ansaldo Balilla in Polish Service

A kit of the Italian Ansaldo A.1 Balilla fighter aircraft in Polish service, 1:32 scale. The finished model has a span of around 24 centimeters.
In stock
131.96 €
Aires/QuickboostQB323391:32

1:32 MC.202 Gunsights Early (San Giorgio Tipo B) 3 pcs

Quickboost 1:32 gunsights for the MC.202 (early version, 3 pcs) is a resin set of San Giorgio Tipo B gunsights for faithfully completing the cockpit of this fighter.
In stock
7.96 €
3DF3DF1072071:72

1:72 Ta 154 exhausts (Hasegawa) 3D print

3DF 1:72 Ta 154 exhausts is a 3D-printed set of exhausts for a model of the Focke-Wulf Ta 154 night fighter. Target kit: Hasegawa.
In stock
7.16 €
Mettalic DetailsMDR482091:48

1:48 Republic P-43A Lancer - 2 variants propeller set (designed be used with Dora Wings kits)

1:48 Republic P-43A Lancer 2 variants propeller set is a resin propeller set with two variants of the propeller for a model of the fighter P-43A Lancer in 1:48 scale. A detail accessory, not a kit.
In stock
7.16 €
AcademyAC134101:72

1:72 U.S. M35 2.5ton Cargo Truck

U.S. M35 2.5ton Cargo Truck 1:72 is an injection-molded plastic kit of the American truck from Academy.
In stock
11.96 €
Mirage HobbyMIR1350051:35

1:35 Polski Oficer Broni Pancernej 1939

A figure of a Polish armored officer of 1939 in 1:35 scale, to be assembled and painted.
In stock
7.56 €
Rise144models144RM0681:144

1:144 Talios targeting pod for rafale (set of 2)

A pair of Talios targeting pods for the Rafale in 1:144 scale. An underwing accessory for a model, two pieces in the package.
In stock
4.76 €
EduardED64811741:48

1:48 A6M Zeke - 3D-Printed Undercarriage Legs for Eduard

Eduard 1:48 A6M Zeke (Zero), 3D-printed landing gear legs are an accessory set that replaces the plastic main landing gear legs on the Zero kits from Eduard. It is not an airplane model but a detail accessory to one.
In stock
9 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.