A decal sheet with a wood grain, prepared for 1:32, 1:35 and 1:48 scale. It is applied by the wet method onto a smoothly painted base.
Responsibility details are not available.
A wood grain is among the things hardest to imitate with a brush. Aircraft with plywood covering, wooden decking, crates and shipping containers in a diorama or a base under a model only look convincing when the wood has regular growth rings at the right density. A printed sheet takes that work off your hands: the grain has a fineness that fits the scale in question.
A printed decal sheet with an imitation of wood, prepared for 1:32, 1:35 and 1:48 scale. You cut the area you need out of the sheet, so one sheet covers several places on the model and in a scene. The layout of the sheet and the recommended procedure are given in the instructions supplied.
It is a wet decal. Paint the base in a shade close to the final color of the wood and varnish it with a gloss finish, so that no silvering bubbles form under the film. Soak the piece you have cut out in lukewarm water for a while, let it stand until it releases from the backing, and slide it into place. Press the water out from under the film with a soft cloth, working from the center toward the edges. On curved surfaces help it along with a decal softener, so that the film beds down. Once it has dried, go over the area with a semi-matte varnish, and the shade can still be evened out with a thin glaze.
The model, the paints and the varnish are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
