1:35 Floor - Old Bricks (190x130mm) is a printed sheet of a weathered brick floor to lay under a scene or a vignette.
Responsibility details are not available.
A thin sheet with quality printing shows an old brick pavement with distinct joints and bricks of uneven darkness. The 190x130 mm format is given in the name; converted at the chosen reduction it corresponds to an area of roughly six and a half by four and a half meters, that is the floor of a small workshop, a passageway or a yard behind a house.
Fired brick was laid where durability mattered and looks did not: in boiler rooms, stables, farm outbuildings, coal stores and the rear wings of town houses. It is exactly the irregularity of the bond and the worn paths that give away that a place was lived in. Add a few missing bricks to the scene and pour grit between them, and the eye will no longer tell where the print ends and the three-dimensional material begins.
First lay the sheet on dry and mark the outline of the base in pencil. Glue it with PVA glue spread in a thin continuous layer and push the air out from the middle to the edges so that no bubble forms. Cut with a new blade along a steel ruler. Go over the visible edge of the paper with paint in the tone of the joints, otherwise the white cut will stand out. Even the tone out with a light spray from a distance or with a glaze.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
