1:48 Sikorsky MH-60L Black Hawk is an Eduard masking set for the outer side of the glazing of a model of the American helicopter.
Responsibility details are not available.
This set from Eduard holds die-cut shapes for the glazing of a model of a special operations helicopter in 1:48 scale. It covers the outside of the glazing; the double-sided version for the same machine is listed separately by the manufacturer under the TFace designation.
The cabin has low-set windshields, side cut-outs, a window in the sliding door and vision ports above the pilots' heads. Together that makes a series of variously curved surfaces with thin frames, which take a long time to trace with tape and seldom come out exactly. A special forces machine is moreover usually in a dark finish, where every overrun is seen at once.
Leave the glazing in its frame and press the shape down through a piece of paper, so that no greasy fingerprint is left on the film. Apply the paint in two thin coats with a pause between them. If it does get under the edge after all, a pass along the edge of the glass with a stick dipped in thinner is enough once the mask is off. Store the clear parts wrapped up until painting, as a scratch on the glass is harder to put right than a mistake in the paintwork. The last check belongs to the seating edge of the door, where inaccuracy shows up first.
Neither the helicopter nor the paints are in this item.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
