A deck sheet for a model of the ship Soryu in 1:700 scale. It is laid on a finished deck and gives it a finer texture than the part from the kit carries.
Responsibility details are not available.
A deck sheet for a model of the ship Soryu in 1:700 scale. It supplements the deck with a finer texture than the molded part from the kit carries, and it shows mainly when viewed from above, that is, the way a model of this size is most often looked at. It is a typical accessory with which a ship model is moved up a level without major intervention in the structure.
A deck sheet belongs on a finished, flat and clean deck. First lay it dry and check that the cutouts fit the superstructures, the hatches and the weapon mounts; small play is easier to true up now than after fixing. The treatment of deck sheets differs, so you will find the method of fixing in the manufacturer's instructions and should go by them. Always choose a procedure in which the sheet does not ripple and nothing soaks through to its face.
Before laying it, rid the deck of sanding dust and fingerprints, because dirt under the sheet will create a visible bump. Check the edges of the cutouts with a sharp point, not with a fingernail. If you are going to tint or weather the deck, try the product first on an unused edge of the sheet and only then apply it to the model.
The set suits modelers who build ships in 1:700 scale and want to get the look of the deck above the level of the part from the kit. The work is undemanding in terms of tools, but it requires patience in seating. The model of the ship, paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
