1:72 3Ro Italian Covered Truck

IBG models 1:72 3Ro Italian Covered Truck is an injection-molded plastic kit of the Italian Lancia 3Ro heavy truck in the guise of a flatbed with a tarpaulin.

Scale1:72
Manufacturer IBG models
Product EAN8591111000000

Responsibility details are not available.

15.96 €
13.19 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

IBG models 1:72 — the Italian 3Ro heavy truck with a tarpaulin

An injection-molded plastic kit in 1:72 scale from the Polish manufacturer IBG models. The subject is the Italian Lancia 3Ro heavy truck in the guise with a covered bed, that is, a flatbed with a tarpaulin. The model is supplied unassembled and unpainted.

The real subject

The Lancia 3Ro was a heavy truck built from the end of the 1930s and was among the most capable machines of its kind in Italian production of that time. It was powered by a diesel engine and the vehicle was built for heavy work in difficult terrain, which showed in the massive frame and the tall cab. It was used for carrying cargo and troops, as an artillery tractor and also as a chassis for various bodies, among others for the self-propelled guise with an anti-aircraft gun of 90 mm caliber. It was deployed in North Africa and on other fronts, and its characteristic silhouette is among the typical motifs of Italian hardware of that time. The version with a tarpaulin over the bed was the most common guise of the transport vehicle.

Building and painting tips

In 1:72 scale the parts are small, so it is advisable to use thin cement for plastic applied with a brush and to cut the parts off with a sharp scalpel, not with cutters. First finish the frame with the drive train and the axles, and only then fit the cab and the bed. A base coat that evens the surface out and reveals imperfect seams comes in handy before painting. For Italian hardware of the North African deployment, sand and ocher tones are typically used, while European deployments tend to be in darker earth shades — check the particular shade against the documentation for the machine you are building. A tarpaulin calls for a different approach from sheet metal: a matte surface, fine accenting of the folds with a lighter tone and fine dust weathering. The chassis and the wheels are brought to life by a wash and by pigments for mud and dust effects.

Who the model is for

  • Modelers interested in Italian hardware of World War II
  • Builders of the small 1:72 scale who put together columns and dioramas
  • Collectors of a line of trucks and artillery tractors
  • Modelers who want to complete a combination with the self-propelled anti-aircraft guise of the same vehicle

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The number of parts is given in the instructions of the kit. It is an injection-molded plastic model of a truck in 1:72 scale.

The build is manageable even with less experience, but the parts are small at this scale. A sharp scalpel, tweezers and thin cement for plastic applied with a brush pay off.

On injection-molded models at this scale the tarpaulin tends to be a plastic part — please check this in the instructions of the kit.

Yes, the same chassis also appears in further guises, for instance as an artillery tractor or a carrier for an anti-aircraft gun. That makes it possible to build a whole combination in the same scale.

Last seen

IBG modelsIBG720931:72

1:72 3Ro Italian Covered Truck

IBG models 1:72 3Ro Italian Covered Truck is an injection-molded plastic kit of the Italian Lancia 3Ro heavy truck in the guise of a flatbed with a tarpaulin.
In stock
15.96 €
PlusmodelPMOAL70171:72

1:72 British 3-inches missile - Beaufighter

Plusmodel 1:72 British 3-inch rockets, Beaufighter is a resin set of unguided rockets and rails for under the wings of the Bristol Beaufighter heavy fighter.
In stock
7.76 €
HaulerHLX482191:48

1:48 Flammpanzer 38(t) Hetzer (TAMIYA)

An accessory set in 1:48 scale for the model of the flamethrower version of the light 38(t) tank destroyer, intended for the Tamiya kit.
In stock
17.60 €
EduardED6723491:72

1:72 WGr.21 for Messerschmitt Bf-109G 3D-Printed

WGr.21 rocket launchers for the Messerschmitt Bf-109G in 1:72 scale in 3D-printed resin. The Eduard set adds the underwing tubes of the anti-bomber weapon to a model; the aircraft itself is not included.
In stock
6 €
HasegawaHA207461:24

1:24 Trust Toyota 92C-V 1992 JSPC

An injection-molded plastic kit of the Trust Toyota 92C-V 1992 JSPC in 1:24 scale from the manufacturer Hasegawa — a Group C racing prototype.
In stock
44.76 €
Plastruct PLT90736

Rectangular Strip (1 pcs) H-0,8mm W-3,2mm L-250mm

Plastruct rectangular profile 0.8 x 3.2 mm (length 250 mm) is a precisely extruded strip in white polystyrene for frames, strips and girders on models.
In stock
0.64 €
ReskitRS72-04531:72

1:72 UB-32A-24 rocket launchers (4 pcs)

1:72 UB-32A-24 rocket launchers (4 pcs) is a set of four 3D-printed rocket launchers for Soviet and Russian helicopters and aircraft.
In stock
8.36 €
ŘOP o.s.F1000/0241:1000

1:1000 R-H-S 80 ,,U potůčku,,

1:1000 R-H-S 80 U potucku is a model of an infantry casemate of the Hanicka fort in 1:1000 scale from the Czech maker ROP o.s.
In stock
4.36 €
Plastruct PLT90872

Hexagonal Rod (1 pcs) W-0,8mm L-250mm

A Plastruct hexagonal rod (1 pc, 0.8 mm across, 250 mm long) is a solid styrene profile for building parts of your own and for reworking models. It is not a kit.
In stock
0.64 €
VMSVMS.P11

Spot-On Pigment No. 11 Light Sand

Spot-On Pigment No. 11 Light Sand is a loose VMS pigment from the numbered Spot-On line. A light sandy shade for the dusty surfaces of models and dioramas.
In stock
5.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.