Quinta Studio 1:72 radial riveting rows, white are raised rivets, that is, rivets standing above the surface in an arched arrangement, finely graded for a small scale.
Responsibility details are not available.
A set of raised rivets, that is, of tiny raised dots that are transferred onto the surface of a model and stay above it. They are neither marking decals nor photo-etched parts. The radial arrangement means rows led into arcs and circles, so you will use them around the engine cowlings, on circular frames and on rounded transitions, where a straight row will not sit. The name gives a rivet size of 0.10 mm and a spacing of 0.4 mm, that is, the fine variant matching 1:72 scale. The white version suits light paintwork.
In a small scale riveting is particularly delicate. One sanded fuselage joint or one filled surface and the original molded detail is gone, while restoring it by hand at this size is all but impossible. Ready-made rows hold a regular spacing and a fineness you cannot reach by hand. A second use is refining coarse riveting on older molds.
Degrease the base, rid it of dust and spray it with gloss varnish, or the fine detail will not seat evenly. Separate the stretch you need, transfer it into place and seat it according to the manufacturer's instructions. Work in very short stretches, use tweezers and press down with a soft brush or a cotton swab. A decal softener will help it follow a rounded shape. Once dry, fix the riveting with varnish and then apply the paint in thin coats, so that the detail is not flooded over at a small scale.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
