1:72 Type 2 Ka-Mi (Dragon)

The Hauler 1:72 Type 2 Ka-Mi photo-etched set is an aftermarket accessory in photo-etched metal for a model of the Japanese amphibious tank. It is not a kit: the fret is etched to measure for the Dragon kit.

Scale1:72
Manufacturer Hauler
Product EAN8591111777452

Responsibility details are not available.

7.96 €
6.58 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Photo-etched accessories 1:72 Type 2 Ka-Mi from Hauler

A fret of photo-etched parts in thin metal with which a plastic model of the Japanese Type 2 Ka-Mi amphibious tank in 1:72 scale is improved. Hauler is a Czech maker of aftermarket accessories for military hardware and this set is cut precisely for the Dragon kit. The model itself is not part of the package.

Why photo-etched parts instead of plastic

Injection-molded plastic has a technological limit on thickness. Anything that on the subject is of thin sheet metal, such as covers, loops, brackets and small linkages, inevitably comes out coarse in 1:72. Photo-etching works in tenths of a millimeter, so the edge of a part matches the scale and the eye registers the difference at once, because it compares the thickness with the surrounding surfaces of the model.

The real subject

The Type 2 Ka-Mi was an amphibious tank of the Imperial Japanese Navy of the Second World War. In design terms it followed on from a light tank, and swimming was made possible by detachable pontoons at the bow and the stern, which were jettisoned after landing. It was intended for operations in the Pacific theater, where a landing directly from ship to shore was envisaged.

Tips for working with photo-etched parts

Cut the parts off with a scalpel on a hard surface, not with nippers, which deform the metal. Make the bends in a bending tool or between two blades, always along the etched line. Before gluing, degrease the metal with alcohol and go over it with primer, otherwise paint will not hold on smooth brass. It is glued with cyanoacrylate applied at points from a drop on a piece of plastic, never straight from the bottle. For places where you need time to position a part, a thicker gel variant is more practical.

Who the set is for

  • Modelers who build armored hardware in 1:72 scale and want finer detail
  • Anyone interested in Japanese hardware of the Second World War
  • Builders of competition models, where the thickness of the parts is judged
  • Those who already have the basic equipment for photo-etched parts: a scalpel, tweezers and cyanoacrylate glue

This is an accessory to a plastic kit, not a standalone model. The kit, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a photo-etched accessory to a plastic kit in 1:72 scale. The model itself has to be owned or bought separately.

Cyanoacrylate, ideally applied with a pin from a drop on a surface. Modeling cement for plastic does not work on metal.

Yes. Degrease it with alcohol and go over it with primer, otherwise paint will not hold on the smooth surface and will peel off during handling.

With a scalpel, tweezers and patience, yes, but it is a good idea to start with the larger parts. The finest parts call for a steady hand.

Last seen

HaulerHLH720201:72

1:72 Type 2 Ka-Mi (Dragon)

The Hauler 1:72 Type 2 Ka-Mi photo-etched set is an aftermarket accessory in photo-etched metal for a model of the Japanese amphibious tank. It is not a kit: the fret is etched to measure for the Dragon kit.
In stock
7.96 €
EduardED490151:48

1:48 F-4 ejection seat grey

Eduard 1:48 F-4 ejection seat grey is a photo-etched set for detailing the ejection seats of F-4 Phantom II fighters. This is a detail accessory, not a model.
In stock
6.80 €
MontexMXK320541:32

1:32 P-47D

Masking set for the P-47D in 1:32 scale. Pre-cut films bound the canopy frames from the outside and the inside and are joined by three national insignia.
In stock
9.96 €
1:350 SBD-3 DAUNTLESS (Pre-painted)-25 %Stock ClearanceFavorite
TrumpeterTR064041:350

1:350 SBD-3 DAUNTLESS (Pre-painted)

1:350 SBD-3 Dauntless (Pre-painted) is a set of miniature plastic carrier dive bombers from Trumpeter with a finish from the factory.
Last one!of 2
13.16 €9.88 € You save 3.28 €
Green Stuff WorldGSW1429

Basing Sets - Toxic

Green Stuff World Basing Sets Toxic is a themed set of materials for building a toxic, contaminated setting on figure bases and in dioramas.
In stock
43.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.