1:35 CH-54A Tarhe painting mask

Clear Prop Models 1:35 CH-54A Tarhe is a pre-cut painting mask for the glazing of a model of the CH-54A Tarhe heavy helicopter in 1:35 scale.

Scale1:35
Manufacturer Clear Prop Models
Product EAN8591111256261

Responsibility details are not available.

12.76 € 9.56 €
7.90 € without VAT
−25 % You save 3.20 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Clear Prop Models 1:35 CH-54A Tarhe painting mask

A masking set for a model of the CH-54A Tarhe helicopter in 1:35 scale. The masks are pre-cut to the shape of the glazing, so they are simply lifted off the backing, stuck onto the clear part and removed after spraying. That saves the most tedious masking on the whole model — cutting tape by hand along the frames, where one slip of the blade shows only after unmasking.

The set is an accessory, not a kit. The plastic model is sold separately. Check the extent of the masks beyond the glazing on the packaging.

The real subject

The Sikorsky CH-54A Tarhe is an American heavy helicopter of the flying crane concept. The fuselage between the cabin and the tail is narrowed to a beam, and the load is carried slung beneath it or in a container between the tall landing gear legs. The cabin is glazed over a large area, including the lower panes, and it has a station for a crew member facing aft who watches the loading directly below him. The number of flat panes and frames makes this machine an ideal candidate for a ready-made mask.

How to use the mask

Wash the clear part and let it dry thoroughly so that the mask holds. Lift the individual masks with tweezers, lay them on and press the edges down with a toothpick — it is at the edge that the paint most often runs under. Spray the paint in thin coats; one heavy coat creates a step at the edge. It pays to spray the frames with interior color first and then with the outside color, so that the transition between them is not visible. Take the mask off shortly after it dries, not days later, and correct any run-under with the tip of a toothpick or a stick.

Who the mask is for

  • Modelers who do not want to cut masking tape by hand
  • Builders of a large helicopter with extensive glazing
  • Those who are after straight, sharp frame edges
  • Modelers who want to save time preparing for spraying

The mask is an accessory for a model. The plastic model, paints and thinner are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Reckon on single use. Once taken off, a mask no longer sits exactly.

You can safely count on the glazing; check the extent of the masks on the packaging.

Press the edges of the mask down with a toothpick and spray thin coats. A heavy coat runs under and forms a step.

No, it is a masking accessory for a plastic model of the CH-54A Tarhe in 1:35 scale.

Last seen

1:35 CH-54A Tarhe painting mask-25 %Stock ClearanceFavorite
Clear Prop ModelsCPA350011:35

1:35 CH-54A Tarhe painting mask

Clear Prop Models 1:35 CH-54A Tarhe is a pre-cut painting mask for the glazing of a model of the CH-54A Tarhe heavy helicopter in 1:35 scale.
3 left
12.76 €9.56 € You save 3.20 €
Royal ModelRM7621:35

1:35 Nurse zombie Zombies serie

A nurse turned into an undead figure is the subject of 1:35 Nurse zombie Zombies serie , a resin casting from the Italian brand Royal Model.
In stock
13.16 €
Royal ModelRM7641:35

1:35 White collar zombie Zombies serie

1:35 White collar zombie Zombies serie belongs to the horror line of the Royal Model brand. The undead figure wears a suit with a shirt and a tie.
In stock
15.96 €
Hobby BossHB803811:48

1:48 F4U-1 Corsair Early version

Hobby Boss F4U-1 Corsair Early version 1:48 is an injection-molded plastic kit of the early version of the famous Corsair carrier fighter. The model is supplied unassembled and unpainted.
In stock
19.56 €
Clear Prop ModelsCPA481101:48

1:48 Bf-109E exhausts for Wingsy kits

Bf 109E exhausts 1:48 from Clear Prop Models — a resin set of replacement exhausts for Messerschmitt Bf 109E kits from Wingsy Kits. It is not a model of an aircraft but a detail accessory for experienced modelers.
In stock
8.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.