Universal masking stencils in the shape of circles of 1 to 4 millimeters in diameter. They serve to bound small round areas sharply when spraying.
Responsibility details are not available.
A small circle is one of the most irritating tasks when painting a model. Cutting one out of tape by hand so that it is really round is next to impossible, and below two millimeters in diameter every tenth counts. This set offers circles in the range of 1 to 4 millimeters in diameter, that is exactly the size in which dials, small lights, round covers, wheel hubs and markings appear on models. The stencils are not tied to one kit nor to one scale; they suit anything where the size fits: to give an idea, a circle two millimeters in diameter corresponds in 1:72 scale to an area just under fifteen centimeters across.
Stick the stencil onto a dry and degreased surface only after the underlying color has been applied and press the whole circumference down, so that no paint runs under the edge. Spray in several thin layers and direct the stream perpendicular to the surface, not at an angle under the edge. Once the paint has dried, do not leave it unnecessarily long and take the mask off with tweezers or the tip of a scalpel. If you are sticking onto a freshly sprayed layer, wait until it has cured properly, otherwise what you wanted to keep will come away as well when you lift the mask.
Paints, thinner and other material are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
