A modeling paint in a rust shade from the ATOM range by AMMO of Mig Jimenez. It suits corrosion, exhausts and worn surfaces on models in any scale.
Responsibility details are not available.
This is a modeling paint in a rust shade, listed by AMMO of Mig Jimenez in the ATOM range under the name Rust. Rust is everywhere on models: it turns up on exhausts, on the scuffed edges of fenders, on bare metal under chipped paint, on chains and cables and on old machines and wrecks in a diorama. The shade does not depend on scale, so one bottle will serve a model in a small scale as well as in a large one.
Choose the thinner and the thinning ratio according to the manufacturer's instructions on the packaging and use the thinner intended for this range. Stir the contents of the bottle thoroughly before work so that the pigment settled at the bottom is spread through the whole volume. Apply the paint in thin coats and let the surface dry between them; a heavy coat floods the fine surface detail that should still show through the corrosion.
Rust never covers a whole surface evenly. Apply it irregularly, with an eye to where water runs down the model, and add fine streaks running downward. A combination of several tones works well, with a darker base coat and lighter additional patches. Wash and degrease the model before painting, otherwise the paint will form blotches on greasy spots. After work, wipe the rim of the bottle and close it carefully, or the cap will dry shut in time.
Thinner, brushes, an airbrush and the model are not included in the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
