A small imitation of fasteners for models: a cone head with an internal hex in the 0.9 mm size. An accessory for models of motorcycles and other machinery with exposed mechanics.
Responsibility details are not available.
A small imitation of fasteners for models. The head has a cone shape, which on a real machine seats into a countersink and levels itself with the surrounding surface almost flush, and in its face it has a hexagonal recess for a key, that is the drive known as an Allen. The size given in the name is 0.9 mm.
An injection-molded kit tends to have the heads of the screws suggested only by a shallow relief, and when the seams are sanded nothing is left of them. A separate element gives the place back a sharp edge and a legible shape of drive, which plastic cannot hold at a size this small. On a motorcycle model countersunk screws tend to be visible on the engine covers, on the handlebar clamps, on the mounting of the brake discs and on the joints of the frame. A cone head suits above all where the surface around the screw is smooth and nothing is to stand out of it markedly.
For the modeler who is finishing a machine with exposed mechanics and wants the detail to stand up even in a close photograph. This is an accessory for a kit, not a kit in itself. A model, paints and glue are not supplied, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
