A set of loaded wheels with a flattened tire for a model of the GAZ-2330 armored car in 1:72 scale, made by 3D printing from resin. According to the name for the ACE 72177 kit.
Responsibility details are not available.
The GAZ-2330 is a Russian armored off-road car with all-wheel drive. The vehicle is heavy and its tires flatten noticeably under its weight at the point of contact with the road. Kit wheels, by contrast, tend to be perfectly round, so a finished model looks as though it were not touching the ground. It is exactly this difference that is visible on finished work sooner than most fine detail.
Wheels with a flattened contact patch for a model in 1:72 scale, made by 3D printing from resin. According to the name they are intended for the ACE 72177 kit.
The flattened area has to point toward the ground, or the wheel looks warped; glue the wheels on last, therefore, and stand the model on a flat surface while doing it, so that all of them sit down. Cut the print supports off with a sharp blade a little away from the part and sand the remainder. Before painting, wash the wheels and degrease them, so that any residue of print resin is removed. It is glued with cyanoacrylate glue (super glue). For the tires reach rather for a dark gray than for pure black, and finally dust the contact patch and the sidewalls with pigment, so that the flattening settles optically into the terrain.
The kit of the vehicle, paints and glue are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
