1:16 Floor Tiles

The product

Floor tiles for dioramas and display-case scenes in 1:16 scale. A model stood on a bare board hangs in a vacuum, whereas paving under it says at once where the machine or the figure is standing. The regular grid of joints moreover works as a scale: in 1:16 a tile 20 cm along the side comes out at 12.5 mm and an adult figure at roughly 11 cm, so even a viewer who does not know the real subject can tell the size of the model.

In a display case and in a photograph

For a display case restraint pays off: a quiet area of paving, one or two extras and enough free space around the model. In a photograph it pays to line the paving up with the edge of the base, so that the joints lead into the depth of the shot; horizontal lines support the perspective that way. A matte coat on the floor plays the reflections down and the model stands out in front of it.

• Floor tiles for dioramas in 1:16 scale
• A regular relief of paving with joints
• A base under a display-case scene and under a single model
• The joints help the viewer judge the size of the model
• The item is distinguished by the code ETA832

Building and painting tips

Cut the excess material away with a sharp blade a little distance from the part and sand the rest level, so that the model stands firmly on all its points. Wash and degrease the area before painting. A base shade, a dark wash into the joints and a dry brush on the edges will give the paving depth; a final matte varnish will unify the surface and play the reflections down. Choose the glue according to the material of the parts; the specific procedure is given in the maker's instructions.

Who it is for

For builders of display-case scenes and dioramas in 1:16 scale and for modelers who photograph their work. Paints and glue are not included in the package, unless stated otherwise.