1:48 RF-4C Phantom II (late without DMAS) 3D-Printed & coloured Interior on decal paper (Hasegawa) (Small version) (with 3D-printed resin parts)

1:48 RF-4C Phantom II (late without DMAS) 3D-Printed & coloured Interior on decal paper (Hasegawa) (Small version) (with 3D-printed resin parts)

26.76 €
Add to Cart

1:48 RF-4C Phantom II (late without DMAS) 3D-Printed & coloured Interior on decal paper (Hasegawa) (Small version) (with 3D-printed resin parts)

Quinta Studio 1:48 RF-4C Phantom II (late without DMAS) cockpit interior (3D decal, small version with resin parts) is a color 3D-printed cockpit interior for the McDonnell Douglas RF-4C Phantom II reconnaissance aircraft in the later form without the DMAS system, in 1:48 scale, as the small version complemented by 3D-printed resin parts.

Scale1:48
Manufacturer Quinta Studio
Product EAN9991117363671

Responsibility details are not available.

26.76 €
22.12 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Quinta Studio 1:48 RF-4C Phantom II (late without DMAS) cockpit interior (3D decal, small version with resin parts)

This is a color 3D-printed cockpit interior for the McDonnell Douglas RF-4C Phantom II reconnaissance aircraft in the later form without the DMAS system, in 1:48 scale, as the small version complemented by 3D-printed resin parts. It is a color three-dimensional interior printed on a decal paper. It is not an airplane model but a detail accessory that replaces the flat or simplified cockpit elements from the base kit. It is the smaller (simplified) version of the set, centered on the key elements of both cockpits and complemented by several 3D-printed resin parts for more three-dimensional detail.

The real subject

The RF-4C Phantom II was an unarmed tactical reconnaissance aircraft derived from the F-4 Phantom II fighter and operated by the US Air Force. It carried photographic and imaging equipment in a lengthened nose and was a two-seater. This form matches the later shape of the cockpit without the DMAS system.

Usage tips

The parts are cut out, soaked for about 15 seconds in lukewarm water and slid off the backing paper into place in the cockpit. They have no adhesive layer of their own and hold on a gloss varnish (Future/Klear, Tamiya X-22), which is why a matte surface is a mistake. Do not use a decal softener, as its chemistry attacks the printed resin and destroys the part; on broken surfaces a drop of super glue and patient work with tweezers help. Painting the instruments is usually not needed, because the panel is already realistically printed.

Who the set is for

  • For modelers who want a realistic cockpit without lengthy painting
  • For builders in 1:48 scale looking for three-dimensional interior detail
  • For advanced as well as moderately experienced modelers used to working with decals

This is an add-on decal set, not a standalone model. The kit, glue and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

This set matches the later form of the RF-4C without the DMAS system, which differed in the layout of the avionics in the cockpit. The early form is listed as a separate variant.

No, it is an add-on cockpit interior set (decals and resin parts) for an RF-4C Phantom II kit. You have to own the model itself.

The resin parts are best bonded with super glue (cyanoacrylate). The color decal parts are soaked for about 15 seconds in lukewarm water and slid off the backing paper onto a gloss varnish; do not use a decal softener on them, as it attacks the printed resin.

Last seen

Quinta StudioQDS+486861:48

1:48 RF-4C Phantom II (late without DMAS) 3D-Printed & coloured Interior on decal paper (Hasegawa) (Small version) (with 3D-printed resin parts)

Quinta Studio 1:48 RF-4C Phantom II (late without DMAS) cockpit interior (3D decal, small version with resin parts) is a color 3D-printed cockpit interior for the McDonnell Douglas RF-4C Phantom II reconnaissance aircraft in the later form without the DMAS system, in 1:48 scale, as the small version complemented by 3D-printed resin parts.
In stock
26.76 €
1:48 F-4S Phantom II 3D-Printed & coloured Interior on decal paper (Academy) (with 3D-printed resin parts)-25 %Stock ClearanceFavorite
Quinta StudioQD+484901:48

1:48 F-4S Phantom II 3D-Printed & coloured Interior on decal paper (Academy) (with 3D-printed resin parts)

A cockpit set for the modernized F-4S Phantom II in 1:48 from Quinta Studio. A decal sheet printed in color, to which resin parts belong according to the name. The target kit: Academy.
4 left
47.16 €35.36 € You save 11.80 €
Dead DesignVM720841:72

1:72 Kawanishi N1K1 Kyofu National Insignia and markings masks

Masks for spraying the national insignia and markings of the Kawanishi N1K1 Kyofu in 1:72 scale from the maker Dead Design. Precise hinomaru templates for a clean spray finish on a floatplane fighter of the Imperial Japanese Navy.
In stock
6.76 €
Voyager ModelPE352861:35

1:35 WWII German Pz.Kpfw.II Ausf.G(B ver include Gun barrel)(For 5M 35001

A photo-etched set for a model of the German Pz.Kpfw.II Ausf.G light tank in 1:35 scale, in the B version, which according to the name includes a gun barrel.
In stock
21.96 €
Furball Aero-DesignFVD0011:48

1:48 Grumman F-14A Tomcat adhesive vinyl detail parts (Tamiya)

1:48 Grumman F-14A Tomcat — self-adhesive vinyl detail parts from Furball Aero-Design are an accessory that is applied to the surface of a finished model. It is not a kit and not decals, but a set of thin flat parts in 1:48 scale. The intended kit is Tamiya.
In stock
8.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.