1:72 F-16 single-seat - pre-cut painting masks is a set of pre-cut painting masks for the single-seat F-16. The set is cut for the Revell kit.
Responsibility details are not available.
A set of pre-cut painting masks for a model of the single-seat F-16 fighter in 1:72 scale. The masks are ready to apply and replace the slow business of cutting shapes out of tape. The set is cut for the Revell kit. That matters because the same masks also come out in versions for other kits, and the name of the type would not tell them apart. The set does not contain a model or paints.
On the F-16 the cockpit glazing is formed by a large one-piece canopy without a windscreen frame, which runs from the nose far back. Masking is therefore more demanding than on machines with a divided cockpit: the paint edge is long and every irregularity stands out on it. On some aircraft the canopy is also tinted a golden shade, which on a model calls for a different approach than clear glazing.
Lift the masks off the sheet with the point of a scalpel or with tweezers. Degrease the surface before applying them, or the tape will not hold. Press the edges down thoroughly with a toothpick so that no paint runs under them. Spray thin coats and take the mask off while the paint is dry to the touch. A cured coat breaks away when the mask comes off and tears the edge.
The set contains painting masks only. Paints and the model are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
