The set of launchers for the Su-27 in 1:48 scale is a 3D-printed resin accessory from Temp Models. These are the mountings for the underwing armament.
Responsibility details are not available.
A resin set of launchers and pylons for a model of the Su-27 fighter in 1:48 scale from the Russian brand Temp Models. These are the parts on which the missiles under the wing and under the fuselage hang, and on a model they tend to be simplified in plastic. Printing in resin makes it possible to render the guide rails, the contacts and the lightening holes as well. It is not an aircraft kit but an armament accessory.
The Su-27 carries its armament on several types of mounting. Short-range missiles hang on rail launchers at the wingtips and under the wing, while heavier medium-range missiles are released by ejector launchers under the fuselage and under the intake ducts. The type of mounting differs with the missile, so the right launcher matters as much for a faithful rendering of the armament as the missile itself.
Release the parts from the supports with a scalpel over a working surface. Level the face with which the pylon meets the wing on abrasive paper laid on glass, so that no gap appears. Wash the resin in lukewarm soapy water before painting. Pylons tend to be in the same shade as the underside of the airframe; bring out the transitions with a faint dark touch into the joints. They are glued with cyanoacrylate glue (super glue).
The set is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
