The set of sensors and antennas for the Su-30SM in 1:48 scale is a 3D-printed resin accessory from Temp Models.
Responsibility details are not available.
A resin set of sensors and antennas for a Su-30SM model in 1:48 scale from the Russian brand Temp Models. These are the small protruding items on the airframe, which in plastic tend to be thicker than the scale would call for, because a thin shape would not come out of the mold. Printed resin manages fine sections. It is not an aircraft kit but an accessory for a finished model.
The Su-30SM is a two-seat multirole machine that carries a whole range of sensors on the airframe: air data probes on the nose, angle-of-attack sensors, communication and transponder antennas on the spine and on the underside of the fuselage, and sensors of the radar warning system. On the upgraded versions the make-up of these items differs from the older machines of the family, so they are a good clue to which version a machine is.
Work over a surface and with tweezers that have smooth jaws; the parts are very small. Cut the supports off with a new blade; never break them. Cut off the original plastic stubs from the kit and smooth the area. Fit them only once the varnishing is finished, so that masking tape does not catch on the parts. Apply the glue with a pin in the tiniest drop.
The set is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
