1:48 Mig-17F wheel bay plugs (for Kinetic)

Shaped plugs for the wheel bays of a MiG-17F model in 1:48 scale, cut for the Kinetic kit. The model is not included.

Scale1:48
Manufacturer Omask
Product EAN9991117369498

Responsibility details are not available.

3.20 €
2.64 € without VAT
14 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

What it is for

Plugs for the wheel bays cover the open bays while a model is being sprayed. They are shaped to match the bay, so they are simply set into the opening, fill it and do not let paint get inside. This set is cut for the MiG-17F model from the Kinetic kit in 1:48 scale.

Why it pays off

Sealing a wheel bay with tape means cutting small pieces, pressing them into corners and still painting in by brush afterwards wherever paint has crept under. A shaped plug does the same in a few seconds and the edge of the bay rim stays sharp. It saves the nerves above all on aircraft where the bays are large and broken up.

How they are used

Paint the inside of the bay first and let it dry properly. Only then set the plug in, and do so before spraying the outer coat, not after it. Do not push it in by force, as the fine lines and struts in a bay break easily; if it will not go in, trim it slightly instead. Take it out with tweezers after spraying, ideally as soon as the paint has set, so that the edge does not tear. Repeat the whole procedure before clear coating.

The real subject

The MiG-17 was a Soviet subsonic fighter that followed on from the earlier MiG-15 and differed from it mainly in a wing with a greater sweep angle. The F form is among the more widespread ones and received an engine with an afterburner. The wheel bays of the MiG-17 are clearly visible from below and from the side, so a sharp edge between the inside of the bay and the color of the model's underside is worth the extra moment of work.

Who it is for

For anyone who builds the MiG-17F from Kinetic and does not want to spend an evening masking the bays. It also helps when you spray a model in several sessions and have to cover the bays repeatedly.

Terms of supply

The model of the aircraft, paints and glue are not part of the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The MiG-17F model from the Kinetic kit in 1:48 scale. With another kit, try the fit in advance, as the bays differ from one to another.

Only after the inside of the bay has been painted, and always before spraying the outer coat. After spraying they are taken out with tweezers, ideally as soon as the paint has set.

Not if you do not push it in by force. If it will not go in easily, trim it a little, as the fine struts and lines break easily.

It is not. The plugs are supplied on their own, and the model and the paints are obtained separately.

Last seen

OmaskOMK7481431:48

1:48 Mig-17F wheel bay plugs (for Kinetic)

Shaped plugs for the wheel bays of a MiG-17F model in 1:48 scale, cut for the Kinetic kit. The model is not included.
In stock
3.20 €
1:72 F6F-5 interior S.A.-25 %Stock ClearanceFavorite
EduardED734041:72

1:72 F6F-5 interior S.A.

Eduard F6F-5 interior S.A. 1:72 is a self-adhesive color photo-etched interior set for a model of the Grumman F6F-5 Hellcat fighter. It is not a model but a metal accessory for a kit.
Last one!of 3
9 €6.76 € You save 2.24 €
Voyager ModelME-A0061:35

1:35 WWII KV Amour plug

Turned armor plugs for models of Soviet KV series heavy tanks in 1:35 scale.
In stock
5.16 €
PeewitPWM1440501:144

1:144 Eurofighter EF-2000A Typhoon

Masks for the Eurofighter EF-2000A Typhoon in 1:144 scale (Peewit) are die-cut self-adhesive templates for the glazing. It is not a kit.
In stock
3.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.