29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.
1:32 Gloster Meteor F.8/FR.9 - Flaps (for Revell Kits)

1:32 Gloster Meteor F.8/FR.9 - Flaps (for Revell Kits)

11.56 €
Add to Cart

1:32 Gloster Meteor F.8/FR.9 - Flaps (for Revell Kits)

Quickboost 1:32 Gloster Meteor F.8/FR.9 – Flaps (for Revell Kits) is a resin detail accessory for the plastic kit in 1:32 scale. This is not a model — the kit itself is not included in the package.

Scale1:32
Manufacturer Aires/Quickboost
Product EAN9991117362982

Responsibility details are not available.

11.56 €
9.55 € without VAT
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Quickboost 1:32 Gloster Meteor F.8/FR.9 – Flaps (for Revell Kits)

A set of replacement flaps cast in resin, intended for the plastic Gloster Meteor F.8/FR.9 kit in 1:32 scale from Revell. Quickboost is a supplementary line from the Czech manufacturer Aires, focused on small, quickly usable upgrade parts. This is not an aircraft model — the kit is not included in the package. You are buying only replacement parts, which you cut from the casting blocks yourself and fit onto your model.

Use

  • Replaces the flaps from the original plastic kit with a more detailed resin casting
  • Lets you display the flaps in the extended (lowered) position, which significantly livens up the model
  • Resin holds sharper edges and finer internal structural detail than injection-molded plastic
  • Installation: cut off the casting blocks with a saw, sand the surfaces flat, dry-fit, glue with cyanoacrylate glue

The real subject

The Gloster Meteor was the first British jet fighter and, at the same time, the only Allied jet aircraft to see combat during the Second World War. The F.8 version was the main postwar fighter variant, with a lengthened fuselage, a new fin and an ejection seat; the FR.9 was a reconnaissance conversion with cameras in the nose. Meteors served with a number of countries well into the 1950s.

Who the set is for

For modelers who already have the large-scale Meteor kit in 1:32 scale and want to bring its detail up to a higher level. Working with resin calls for a somewhat steady hand — it suits more experienced builders better, but a careful beginner can manage it too on a small part like the flaps.

Before gluing, wash the parts in warm water with dish soap (residue of the mold release agent hinders paint adhesion). Cut off the casting blocks with a saw, not by snapping them off. Sand the resin wet and with respiratory protection — the fine dust is harmful to health. Glue with cyanoacrylate glue; ordinary plastic cement does not work on resin. Glue, paints and the kit are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. This is a supplementary detail set — it contains only resin flaps. The plastic Meteor kit itself is not included in the package, and you must have your own.

The set is designed for the Gloster Meteor F.8/FR.9 kit in 1:32 scale from Revell. It is not intended for kits from other manufacturers or in other scales.

With cyanoacrylate glue. Ordinary plastic cement does not dissolve resin and does not hold. Wash the parts before gluing and sand the surfaces flat.

A resin casting holds thinner edges and finer internal structural detail than injection-molded plastic can manage for technical reasons. The difference is most visible when you display the flaps lowered.

Last seen

Aires/QuickboostQB323561:32

1:32 Gloster Meteor F.8/FR.9 - Flaps (for Revell Kits)

Quickboost 1:32 Gloster Meteor F.8/FR.9 – Flaps (for Revell Kits) is a resin detail accessory for the plastic kit in 1:32 scale. This is not a model — the kit itself is not included in the package.
In stock
11.56 €
TamiyaTA80011

X-11 Chrome Silver (Enamel)

Tamiya X-11 Chrome Silver (Enamel) is a metallic chrome silver enamel modeling paint with a volume of 10 ml for finishing with a brush or an airbrush.
In stock
1.56 €
1:350 F/A-18D HORNET-25 %Stock ClearanceFavorite
TrumpeterTR062341:350

1:350 F/A-18D HORNET

A plastic kit of the 1:350 F/A-18D Hornet from Trumpeter - a set of miniature carrier aircraft for populating the deck of an aircraft carrier model in 1:350 scale.
2 left
6.76 €5.08 € You save 1.68 €
EduardED6320141:32

1:32 B-25H/J wheels

1:32 B-25H/J wheels (Eduard Brassin) is a resin detail set of replacement wheels for models of the American North American B-25 Mitchell medium bomber.
In stock
10.40 €
MontexMXK323141:32

1:32 P-36 MOHAWK

A set of masking films for a large model of the prewar Curtiss Hawk in British markings. The stencil for the flat windscreen has two layers, and two roundel discs and a marking sheet are enclosed.
In stock
10.36 €
Model CraftPCL8710/2

Small Multi Clamps (40mm) x 2

A pair of small clamps with a 40 mm opening from Model Craft. They hold glued parts until the joint has cured.
In stock
13.96 €
OmaskOMK772631:72

1:72 B-26 Marauder wheel bay plugs (for Hasegawa, Hobby 2000)

Omask 1:72 B-26 Marauder - landing gear bay plugs are foam plugs that press into the open landing gear bays and protect them while paint is being sprayed. It is not a model but a masking aid.
In stock
4 €
EduardED111681:48

1:48 SAMURAI DUAL COMBO

Eduard 1:48 SAMURAI DUAL COMBO is a limited edition from the Czech maker Eduard which contains TWO models of the Japanese Mitsubishi A6M3 Zero fighter.
In stock
70 €
PlusmodelK14

Šroubení K 14

The Plusmodel K 14 airbrush fitting connects an air hose and an airbrush. A practical accessory for an airbrush setup.
In stock
4.20 €
New WareNWAM06601:48

1:48 P-38F/G Lightning BASIC kabuki masks

The New Ware BASIC masking set for a model of the Lockheed P-38F/G Lightning in 1:48 scale gives clean framing of the glazing and the wheels.
In stock
6.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.