Revell - Maskovací páska 20 mm

Revell masking tape 20 mm is a wide modeling masking tape for covering larger areas while spraying paint and varnish.

Manufacturer Revell
Product EAN8591111396967

Responsibility details are not available.

3.96 €
3.27 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Revell masking tape 20 mm

A modeling masking tape 20 mm wide, intended to cover areas that are not to be oversprayed with paint or varnish. The wide format suits straight edges and larger continuous areas in particular, where it saves piecing narrow strips together. The tape holds reliably, and once the paint has dried it can be peeled off without damaging the surface and without leaving adhesive behind. Suitable for airbrush and spray can alike.

Use

  • Stick the tape along the edge of the area you want to protect from the spray.
  • Press the edge of the tape down well, so that paint does not creep underneath it.
  • Ideal for covering larger flat areas and sharp transitions.
  • Once the paint has dried, peel the tape off carefully at a shallow angle.
  • Combine it with a narrower tape for masking curves and details.

Who it is for

For modelers who need to mask larger areas and straight edges quickly and reliably when spraying paints and varnishes in several colors.

Intended for modeling use. Keep out of the reach of children.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

For masking larger flat areas and edges that are not to be oversprayed. The wide 20 mm format saves piecing narrow strips together.

Used correctly, no. Peel the tape off carefully at a shallow angle once the paint has dried, so that it does not damage the surface.

For tight curves and fine details a narrower tape is more suitable. The wide 20 mm tape is used mainly on flat areas.

Last seen

RevellRE39696

Revell - Maskovací páska 20 mm

Revell masking tape 20 mm is a wide modeling masking tape for covering larger areas while spraying paint and varnish.
In stock
3.96 €
PANZER ARTTR35-0071:35

1:35 Pz.Kpfw VI “Tiger” (P) tracks

PANZER ART 1:35 Pz.Kpfw. VI Tiger (P) – tracks is a resin set of individual workable track links for building Porsche's version of the Tiger heavy tank.
In stock
27.16 €
FineMoldsFF061:72

1:72 F-4 E Phantom - USAF Jet Fighter (Late) / Clark Air Base

A plastic model of the F-4E Phantom II fighter-bomber of the US Air Force (late version, Clark Air Base) in 1:72 scale from Fine Molds.
In stock
35.96 €
AFV ClubSE735011:350

1:350 U-Boat XXI Submarine

A model of the German Type XXI submarine of the end of the Second World War in 1:350 scale. A subject that was the first to be designed to spend most of its time under water.
In stock
15.96 €
EduardJX2301:32

1:32 Consolidated B-24D/B-24J Liberator

Consolidated B-24D and B-24J Liberator 1:32 is a set of pre-cut Eduard masks for the extensive glazing of the model. It is an accessory for a kit, not a model.
In stock
15.80 €
OmaskOMK570371:72

1:72 L-29 Delfín mask (for AMK / Eduard)

Omask 1:72 L-29 Delfin, a masking set for the glazing (for AMK / Eduard) is a set of precisely shaped masks in yellow masking tape for spraying the canopy frames. It is not a model, and the kit is not included in the package.
In stock
5.16 €
ReskitRSU48-02421:48

1:48 LTV A-7D/A-7E Corsair ejection seat IC-2 / IG-2 early

Reskit ejection seat for the A-7D/E Corsair II, IC-2 / IG-2 early, 1:48 is a resin replacement seat that refines the interior of a model cockpit. It is an accessory, not a model.
In stock
9.16 €
ReskitRS48-03951:48

1:48 AT730 TRIPLE STORE RACKS FOR RAFALE (2 PCS) (3D PRINTING)

Reskit 1:48 AT730 triple store racks for the Rafale (2 pcs) is a 3D printed resin set of two triple ordnance carriers from the Ukrainian maker Reskit. It lets you arrange the stores under a Rafale model realistically.
In stock
13.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.