The boarding ladder for the Su-35 in 1:72 is a printed ground crew accessory for airfield dioramas. An airplane model it is not.
Responsibility details are not available.
A piece of ground equipment in 1:72 scale from the Russian manufacturer Temp Models, printed from photopolymer. The manufacturer intends it for work during the ground servicing of aircraft and for the crew getting in and out, that is mainly for dioramas on an aviation theme. An aircraft model is not included in the package.
The Su-35S is a large aircraft with its cockpit high above the ground, so neither the pilot climbing aboard nor routine maintenance can do without a ground ladder. Technicians use it to reach the cockpit, the avionics and the upper surface of the fuselage. In photographs from the bases it stands beside the aircraft practically every time, and on a model it gives away the scale at once and lends the scene a human dimension.
The parts are printed from photopolymer and are held on thin print supports. Cut them away with a sharp scalpel and sand the pad. They are glued with cyanoacrylate glue, that is with super glue. Once a filler primer is laid down, a dark wash into the recesses of the structure and fine chipping on the edges of the steps will stand out. Hold the small parts with tweezers and work over a mat with a raised edge. Sanding is best done wet and with respiratory protection.
The set is supplied unassembled and unpainted. Glue, paints and the base model are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
