Landing gear legs for the Su-25 in 1:48 scale are a 3D-printed resin accessory from Temp Models, reinforced with steel pins.
Responsibility details are not available.
A resin set of landing gear legs for a model of the Su-25 attack aircraft in 1:48 scale from the Russian brand Temp Models. The manufacturer describes it as the nose leg and the main legs in the extended position, with the electrical and hydraulic lines picked out, with landing lights and with a fender. The parts are printed from a strong polymer and reinforced with steel pins, so they carry the weight of a finished model. It is not an aircraft kit.
The Su-25 is an attack aircraft built for work low over the battlefield and for operation from simple surfaces. The landing gear was therefore given a rugged design with fenders that keep stones from being thrown into the engines. It is precisely the fender on the nose leg that is one of the details by which the type is recognized at first glance, and a plastic kit often resolves it with no more than a suggested shape.
Release the parts from the supports with a scalpel and level the mating faces. Wash the resin in lukewarm soapy water before painting. Spray the legs before fitting and only then bring the lines out with a dark tone. Stronger weathering suits the area around the fender and the landing lights; on an attack aircraft this place is always the dirtiest.
The set is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
