A board of dense foam measuring 350 x 250 mm and 4 mm thick, a material for building walls, ruins and terrain features on dioramas.
Responsibility details are not available.
A board of high-density foam measuring 350 x 250 mm and 4 mm thick. It belongs among materials for dioramas, that is among items from which you make the structure, the terrain or the base yourself. The name of the line refers to a wall and the most common use of dense foam matches that: surfaces into which masonry, fallen render or paving is scribed.
Four millimeters is the thicker of the two available thicknesses. A wall made from it comes out self-supporting, so it can be built as a free-standing ruin, and the deeper material takes bolder relief: a broken edge, missing bricks or deep joints. Keep the thinner 3 mm variant for cladding, paving and partitions, where a thicker board would look oversized in scale.
Cut with a sharp knife along a ruler, and in several light passes instead of one heavy one, otherwise the edge will buckle. Set the joints out in pencil first and only then press them in with a blunt point: you are taking material away from the foam and cannot put it back. Not every glue and not every thinner gets on with foam; some attack it. Test both on an offcut, let them dry and only then work on the structure itself. Before painting, the surface is usually sealed with a unifying coat.
For builders of dioramas and display scenes in any scale and for those who want to make a wall or terrain to fit the scene instead of hunting for a ready-made part.
The model, figures, paints, glue and tools are not included in the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
