DSPIAE PMT-H09 Precut Masking Tape is masking tape with pre-cut hexagons 9 mm in size. The shapes only have to be peeled off and stuck down; nothing gets cut out.
Responsibility details are not available.
Masking material for painting. On the tape there are hexagons 9 mm in size cut out in advance, so that cutting the same shapes out accurately and repeatably with a knife along a rule falls away. You peel the individual shapes off, stick them on the model and spray. This is the 9 mm variant, that is the larger shape of the range made; smaller sizes are made as well. Choose the size of the shape by the scale of the model: what looks coarse in a smaller scale looks natural on a large area.
Always press the edges of a stuck-down shape well, best with a toothpick or a blunt point, or the paint will creep under. Spray in thin coats and at right angles to the surface. Lift the tape shortly after the paint has dried, slowly and at a slant across the edge, not straight up, so as not to tear the base coat off. Do not stick a mask onto a fresh or soft coat, and on delicate surfaces lower the tack of the tape beforehand by sticking it to the back of your hand and pulling it off.
Check the length of the roll, the number of shapes and the material of the tape on the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
