Tamiya

57 products
Product filtering
up to €
TamiyaTA7807148

Needle 0.5mm 74523

A 0.5 mm needle is a genuine Tamiya spare part for the Spray-Work HG Wide 74523 airbrush, that is for an airbrush made for a wide spray on large areas.
In stock
9.16 €
TamiyaTA7807147

Nozzle: 74523

A 0.5 mm nozzle is a genuine Tamiya spare part for the Spray-Work HG Wide 74523 airbrush with trigger control and a 15 ml cup.
In stock
31.16 €
TamiyaTA7807101

Nozzle Cover Pos.2

Nozzle Cover Pos.2 is a spare nozzle cover for a Tamiya airbrush, carrying the manufacturer's designation Pos.2.
In stock
11.16 €
TamiyaTA7807100

Needle Cover Pos.1

Needle Cover Pos.1 is a spare needle cover for a Tamiya airbrush, carrying the manufacturer's designation Pos.1.
In stock
5.96 €
TamiyaTA7807015

Hose Connector with Airstop Valve

Hose Connector with Airstop Valve is a Tamiya air hose connector with an airstop shut-off valve that stops the flow of air once the airbrush is disconnected.
In stock
18.76 €
TamiyaTA7807012

Balance Weight for 74503

Balance Weight for 74503 is a spare balance weight for the Tamiya airbrush that the manufacturer lists under the number 74503.
In stock
11.56 €
TamiyaTA7800279

Bellows to the compressor 74520

Bellows to the compressor 74520 is a spare bellows for the compressor of the Tamiya Spray-Work Basic spray set with the number 74520.
In stock
25.96 €
TamiyaTA7800152

Pistol Grip Shell (L) 74520

Pistol Grip Shell (L) is a spare left half of the pistol grip for the Tamiya Spray-Work Basic spray set with the number 74520.
In stock
7.16 €
TamiyaTA74562

Quick Hose Joint Plugs (2 pieces)

Tamiya Quick Hose Joint Plugs is a pair of spare plugs for the quick coupling of an air hose, letting you disconnect the airbrush in a single movement.
In stock
11.16 €
TamiyaTA74554

Air Compressor Anti-Vibration Mat

Tamiya Air Compressor Anti-Vibration Mat is a black damping mat of 155x225x10 mm that is laid under a compressor and absorbs vibration.
In stock
7.56 €
TamiyaTA74547

Air Hose (1.5m) For Hg Air Compressor Revo II

A clear air hose 1.5 m long with a type S connector, that is PF1/8, from Tamiya. It is intended for the HG Revo II compressor as well as other air sources and withstands pressure up to 0.15 MPa.
Currently unavailable
9.96 €
TamiyaTA7807019

Nozzle Wrench

Nozzle Wrench is a small wrench from Tamiya for fitting and removing an airbrush nozzle. It lets the nozzle be tightened evenly and without the risk of damaging it.
In stock
3.16 €
TamiyaTA7807008

Needle Spring

Needle Spring is a spare part for Tamiya airbrushes: a compression spring that returns the needle forward into the nozzle as soon as you release the trigger.
In stock
4.76 €
TamiyaTA7807001

Needle Cover

Needle Cover is a spare part for Tamiya airbrushes: a cap that is fitted over the nozzle and protects the protruding tip of the needle while the airbrush is being stored.
In stock
5.56 €
TamiyaTA10327

HG AIRBRUSH NOZZLE (0.3MM)

A replacement nozzle three tenths of a millimeter in diameter for airbrushes of the Japanese HG range. One piece, intended for very fine lines.
In stock
23.40 €
TamiyaTA74564

SPRAY-WORK AIRBRUSH STAND III

Tamiya Spray-Work Airbrush Stand III is a bench stand for resting airbrushes which clamps to the edge of a bench and keeps the airbrush always at hand.
In stock
25.56 €
TamiyaTA74550

Airbrush Cleaning Brush (Extra-Fine)

Tamiya Airbrush Cleaning Brush (Extra-Fine) is a fine cleaning brush with nylon bristles for clearing out the nozzle and the narrow places of an airbrush.
In stock
6.76 €
Needle Adjuster: 74532-25 %Stock ClearanceFavorite
TamiyaTA7807197

Needle Adjuster: 74532

Needle Adjuster is a replacement needle adjusting screw for the Tamiya Spray-Work HG Airbrush III, with which the maximum needle travel and the paint flow are set.
Last one!
13.16 €9.88 € You save 3.28 €
TamiyaTA7807196

Needle Chuck: 74532

The Tamiya needle chuck for the 74532 airbrush is a genuine spare part for the Spray-Work HG Airbrush III with a 0.3 mm nozzle.
In stock
13.96 €
TamiyaTA7807126

Nozzle for 74520 0.3mm

The Tamiya 0.3 mm nozzle for the 74520 set is a genuine replacement nozzle for the airbrush from the Spray-Work Basic set with a compressor.
In stock
5.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.