Waterline for Ships and Submarines - Width 0.5 mm / Length 2820 mm (for All Kits)

Waterline marking for ships and submarines, 0.5 mm wide (Quinta Studio)

This is an aid for building ship models, not a model. The package contains a thin self-adhesive strip 0.5 mm wide and 2820 mm long with which you can mark an accurate, straight waterline on the hull. The medium width of 0.5 mm is clearly visible and suits most models.

Use

• Clean and degrease the hull so that the strip holds well.
• Lay the strip along the intended waterline; its flexibility lets it follow the curves of the hull.
• Use the strip as a guide when masking and painting the underwater and above-water parts.
• Leave it in place as the final marking if you wish, or take it off once the paint is on.

Who it is for

• Builders of ship and submarine models who want a straight, clean waterline.
• Modelers working with waterline and full-hull models in various scales.

The accessory is universal for models of various brands. Paints and glue are not included in the package.