1:144 A-321 Painting mask (ZVE)

1:144 Airbus A321 – masking stencils for spraying is a set of self-adhesive stencils that define the shapes of the color scheme for airbrushing on a model of the narrow-body airliner. They are not canopy masks.

Scale1:144
Manufacturer SX-Art
Product EAN8591111000000

Responsibility details are not available.

3.56 €
2.94 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:144 Airbus A321 – masking stencils for spraying

This set from the manufacturer SX-Art brings self-adhesive stencils for spraying the color scheme on a model of the Airbus A321 airliner in 1:144 scale. The stencils determine the shape that is airbrushed, so the colored areas of the model are made of paint and not of applied decal film. These are not masks for the flight deck glazing.

The real subject

The Airbus A321 is the longest member of the A320 family of narrow-body twin-engine airliners. Compared with the shorter versions it has a stretched fuselage, strengthened landing gear and modified wing high-lift devices, but otherwise it shares the same flight deck and overall design with the rest of the family. It is used mainly on densely loaded medium-haul routes.

A small scale and thin lines

In 1:144 scale the narrow fuselage of the A321 is narrow indeed, and the colored bands on it are often only a few tenths of a millimeter wide. This is where the main advantage of a ready-made stencil over taping shows: a cut shape is the same width along its whole length, whereas tape applied by hand curves imperceptibly on a rounded fuselage. You will make the work easier by spraying the darker or more saturated shade first and the light one over it — with thin lines it is easier to cover a narrow strip with a large area than the other way round. Press the film down with a fingernail over a soft pad rather than with a sharp tool, so that the thin bridges of the stencil are not deformed. Spray at low pressure and low flow; with shapes this fine, overspray immediately enlarges the edge. Remove it carefully and slowly, as thin strips of film like to tear.

Who the set is for

  • builders of civil aircraft in 1:144 scale
  • modelers who want colored bands of even width
  • airbrush users working with fine shapes
  • those who do not want to apply thin tape to a rounded fuselage

This is a building accessory, not a model. Paints, glue and the kit are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

On a rounded narrow fuselage tape curves and the width of the band varies. A cut stencil keeps the same width along its whole length.

The name of the set does not distinguish the engine version. For spraying the fuselage areas the difference is usually marginal, but check the shape of your model.

Slowly and at an angle backwards, ideally with flat-jawed tweezers. Thin strips of film tear if pulled quickly and can stay on the model.

Last seen

SX-ArtSXA440071:144

1:144 A-321 Painting mask (ZVE)

1:144 Airbus A321 – masking stencils for spraying is a set of self-adhesive stencils that define the shapes of the color scheme for airbrushing on a model of the narrow-body airliner. They are not canopy masks.
In stock
3.56 €
Artwox ModelAW201471:700

1:700 HMS Malaya 1943 (For Trumpeter 05799)

Artwox Model wooden deck HMS Malaya 1943 in 1:700 scale replaces the smooth plastic deck with a veneer cut-out carrying printed plank laying. It is sold on its own, without a kit. The cut-out matches the decks of the Trumpeter 05799 kit.
In stock
17.16 €
FLEX-I-FILEFFCS150

Cone Tip Sander with Peel & Stick Abrasive Pieces 150 Grit

The FLEX-I-FILE cone tip sander in 150 grit is an applicator handle with a cone tip and a set of peel and stick abrasive pieces for coarser material removal in places an ordinary sanding block cannot reach.
In stock
7.56 €
Hobby DesignHD03-04231:24

1:24 Show Girl (C) (1 Resin Figure)

A resin figure of a female character in 1:24 scale, the form marked with the letter C. The package holds one figure for rounding out a model of a car or a diorama.
In stock
25.56 €
AoshimaAO055131:35

1:35 Car Modify Wonder A31 Nissan Cefiro '90

A plastic kit of the Japanese sedan Nissan Cefiro of the A31 generation in a body modification that appears under the designation Car Modify Wonder.
In stock
23.96 €
CMKCMK80321:48

1:48 Steyr 1500 Cargo Truck conv. for TAM

Steyr 1500 cargo version 1:48 is a CMK resin conversion set that turns a plastic kit into the flatbed variant of the car. It is not a model in its own right.
In stock
9.96 €
Mantis MiniaturesMANMAC061:35

1:35 Canvas roof for Kubelwagen

A canvas top for the Kübelwagen is a resin detail set in 1:35 scale from the Polish brand Mantis Miniatures. It is not a model, but an accessory to a model of the Kübelwagen.
In stock
17.16 €
Studio27ST27-CD240101:24

1:24 McLaren F1-GTR (short tail) carbon decal

Studio27 1:24 McLaren F1-GTR (short tail) carbon decal is a set of waterslide decals with a faithful carbon pattern for a model of the McLaren F1 GTR in the short-tail version.
In stock
35.96 €
OmaskOMK7481311:48

1:48 Mig 21 F wheel bay plugs (for Eduard)

Omask 1:48 MiG-21F, masking plugs for the landing gear bays are not parts for a model but a masking aid. The flexible foam plugs are pressed into the bays of the Eduard MiG-21F model, cover them during spraying and are taken out afterwards.
In stock
3.20 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.