29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

1:32 Pine Tree - Faded

A 1:32 decal sheet with the pattern listed under the Pine Tree designation, in a faded rendering. Intended for aircraft models.

Scale1:32
Manufacturer HGW
Product EAN8591111144520

Responsibility details are not available.

7.08 €
5.85 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A 1:32 decal sheet under the Pine Tree designation

A decal sheet for aircraft models in 1:32 scale. It carries the pattern listed under the Pine Tree designation, in the variant described as faded, that is in more muted shades. What exactly the sheet contains and which areas of the model the individual pieces belong on is given in the instructions enclosed by the manufacturer.

Why reach for a printed sheet

A continuous pattern can hardly be applied evenly with a brush or an airbrush. A printed sheet solves it differently: the pattern is printed in advance and transferred onto the model as a decal, so it comes out the same across the whole area and does not depend on a steady hand. The faded rendering suits a machine that has been in service for a while, and on a model with discreetly accented surfaces it sits better than saturated factory paint.

  • A decal sheet for aircraft models in 1:32 scale
  • The pattern under the Pine Tree designation in a faded rendering
  • Applied the wet way, after a water bath
  • A decal softener helps settle the film into a textured surface
  • The extent of the sheet and its intended use are described in the manufacturer's instructions

How to apply the sheet

First overcoat the area under the transfer with gloss varnish; on a matte surface white patches form under the film. Cut out the piece with a narrow margin, dip it in lukewarm water for a few seconds and let it rest until it can be slid off the backing. Settle it on the damp area, press the water out with a soft cloth from the center to the edges and blot the excess. A decal softener helps settle the film into the recessed lines and over the rivets; let it work and do not move the piece any more. Finally overcoat the finished area so that the edges of the film disappear.

Who it is for

For the modeler who is building an aircraft in a large scale and wants an even pattern on the surface. The work calls for patience; large pieces settle less easily than small decals.

The package contains a decal sheet. The model, paints, varnish and decal softener are not part of the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

A decal sheet in 1:32 scale. The model, paints, varnish and decal softener are not part of the delivery, unless stated otherwise.

The wet way: the piece is cut out, dipped in lukewarm water for a few seconds and, after resting, slid onto gloss varnish. The exact instructions are in the manual enclosed with the sheet.

The name gives only the 1:32 scale and the designation of the pattern; it does not specify a kit. The intended use is given in the manufacturer's instructions.

On a smooth area you can do without it, but over rivets and into recessed lines it helps the film a great deal. It is applied once the piece is settled, and the piece is then not moved again.

Last seen

HGWHGW5320211:32

1:32 Pine Tree - Faded

A 1:32 decal sheet with the pattern listed under the Pine Tree designation, in a faded rendering. Intended for aircraft models.
In stock
7.08 €
AberABRS16

Drilled plate 0,9 mm

The Aber etched perforated plate 0.9 mm is a brass sheet with 0.9 mm holes for perforated panels, covers and anti-slip surfaces on models.
In stock
6.76 €
1:48 F-4 exhaust-25 %Stock ClearanceFavorite
EduardED484621:48

1:48 F-4 exhaust

A photo-etched detail set Eduard F-4 exhaust 1:48 for sharpening the exhaust nozzles of the Phantom II fighter. An accessory, not a model.
2 left
6.80 €5.12 € You save 1.68 €
1:72 PBM-5A Mariner interior-25 %Stock ClearanceFavorite
EduardED738211:72

1:72 PBM-5A Mariner interior

A photo-etched set for the interior of a model of the Martin PBM-5A Mariner in 1:72 scale from the Czech manufacturer Eduard. A full set aimed at the inside of the fuselage, which is well visible on a flying boat.
Last one!of 2
23.60 €17.72 € You save 5.88 €
OmaskOMK57082

produkt-OMK57082

1:72 DFS-230A mask is a set of pre-cut masking templates for a model of the German DFS 230A assault glider.
In stock
6.76 €
AMMO of Mig JimenezA.MIG-8860

Weed Tuft (6 mm) - Intensive Spring

Weed Tuft (6 mm) - Intensive Spring are scenic grass tufts 6 mm high in the fresh green tones of spring, intended to bring dioramas and bases to life.
In stock
9.16 €
Re Zero Serenus Couture - Rem Vol. 2-25 %Stock ClearanceFavorite
BandaiBANBP19018

Re Zero Serenus Couture - Rem Vol. 2

Re:Zero Serenus Couture - Rem Vol. 2 is a finished collector figure of the maid Rem by Bandai. It arrives fully painted and all you do is display it.
Last one!
29.56 €22.16 € You save 7.40 €
TrumpeterTR055371:35

1:35 PLA Type 62 light Tank

Type 62 is a plastic kit of the Chinese light tank, in 1:35 scale from Trumpeter.
In stock
24.36 €
Black Dog modelBDA481601:48

1:48 A-4 Skyhawk wheel bays + engine

A resin set of the landing gear bays and the engine for models of the A-4 Skyhawk in 1:48 scale for a faithful finishing of the interior spaces.
In stock
18.36 €
U-STARUA90671

Large Area Flat Grinding Plate (400#)

U-STAR large flat grinding plate 400 is a rigid sander with a large surface for sanding larger model parts flat.
In stock
8.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.