A printed sheet with pine wood grain in a natural shade, 1:32 scale. A wet transfer for areas where bare wood is to be seen.
Responsibility details are not available.
Pine has a striking grain: a light ground into which darker stripes of growth rings and knots converge. It was exactly this timber that the load-bearing frames of aircraft were built from in the days before metal construction, and it is also visible on floors, boarding and simple equipment. Reproducing such a drawing by hand is slow, and when it is repeated over several parts the shade usually drifts apart. A ready print solves that in one stroke.
A continuous area with pine wood grain in a natural, that is untinted shade, prepared for 1:32 scale. In the large scale the structure of the wood reads well, so it pays to watch which way the fibers run: along a spar, across the area on plywood covering, from the root to the tip on a propeller blade. The sheet carries no ready-cut part shapes; they are cut from it using a template traced from the kit part. The remainder of the sheet can also be used to wrap small items such as crates and tool handles.
A printed sheet is supplied, that is an accessory for the build. The model, paints, varnishes and decal softener are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
