LAST CHANCE! 20% OFF Ends Tonight!

1:35 FUEL TANK FOR M113 FAMILY, DRAGON KITS

ELEFANT 1:35 Fuel tank for the M113 family is a resin replacement part for models of the American M113 tracked carrier in 1:35 scale. It is not a kit but an accessory for a model you already have.

Scale1:35
Manufacturer ELEFANT
Product EAN8591111000000

Responsibility details are not available.

8.76 €
7.24 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Fuel tank for the M113 family, 1:35 scale, ELEFANT

This resin fuel tank from the brand ELEFANT replaces the corresponding part on models of the American M113 tracked armored personnel carrier and of the vehicles derived from it. It is a detail accessory, not a vehicle model; the basic kit has to be on hand.

Compatibility and a dry fit

With replacement parts of this size the mating surface decides everything. Before you reach for the glue, offer the tank up dry and check against the light whether a gap is left between the part and the hull; on resin castings the lower surface is deliberately left slightly over-sanded and it is fine-tuned with a few strokes of abrasive paper laid on glass or another flat board. At the same time, check the position of the mountings and whether fitting them means removing part of the original plastic relief. The M113 family is wide and individual kits handle the rear differently, so a dry fit saves later repairs.

Usage and painting tips

First wash the casting in lukewarm water with detergent, so that no mold release agent is left on the surface. It is glued with cyanoacrylate glue; on a larger mating surface the gel version is safer, as it gives time to true things up. Run a thin layer of putty into the seam around the edge and sand it back, otherwise the base color will emphasize it. Then comes primer, the base shade and only afterwards the details. On real vehicles the tanks tend to be the most marked by service, so worn finish, a faint shadow under the edges and fine mud where it sprays off the tracks all pay off here.

Who the accessory is for

  • Builders of armored personnel carriers of the M113 family in 1:35 scale
  • Modelers who want to replace the simplified part from a kit
  • More experienced builders used to sanding a mating surface and filling
  • Those who work with resin and cyanoacrylate glue

The accessory is supplied unpainted and without the base kit. Glue, paints and tools are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The accessory is developed for specific kits of the M113 family, and according to the name these are kits by Dragon; the kits differ in how they handle the rear. Always do a dry fit and if necessary fine-tune the mating surface with abrasive paper.

The name speaks of a fuel tank in the singular; the exact number of pieces is stated on the box. If you need to fit both sides of the vehicle, allow for that when ordering.

Usually yes, at least partly. Cut the original relief off and level the area, so that the new tank seats without a gap.

A thin layer of putty, sanded back once dry and oversprayed with primer. Without that the first coat of paint will emphasize the seam.

Last seen

ELEFANTEL351921:35

1:35 FUEL TANK FOR M113 FAMILY, DRAGON KITS

ELEFANT 1:35 Fuel tank for the M113 family is a resin replacement part for models of the American M113 tracked carrier in 1:35 scale. It is not a kit but an accessory for a model you already have.
In stock
8.76 €
RPMRPM725041:72

1:72 TK-W I Light Tank w/ 7,62mm Hotchkiss wz.25

RPM 1:72 TKW - a light tankette with the Hotchkiss wz. 25 machine gun is a plastic model of the prototype Polish tankette with a rotating turret, an unusual subject from interwar armor development.
In stock
8.76 €
Eureka XXLER-35601:35

1:35 Towing cable for Israeli IDF Magach 6B Gal Batash Tank

The towing cable for the Israeli Magach 6B Gal Batash tank 1:35 from Eureka XXL is an add-on set that replaces the flat plastic cable with a convincing braided one.
In stock
9.96 €
Syhart DecalSY72-1071:72

1:72 Mirage 2000P n°060 25 años 412Sqn Peruvian AF - 2010/11

A sheet of markings for the Peruvian Mirage 2000P with the number 060 in the jubilee treatment for twenty-five years of No. 412 Squadron, as it looked in the 2010 and 2011 season. Intended for models of size 1:72.
In stock
11.16 €
Red Fox StudioRFSQS-320061:32

1:32 Focke-Wulf Fw190 A-8/R11 (for Revelll kit)

A set of decal elements for a model of the Focke-Wulf Fw 190A-8/R11 aircraft in 1:32 scale, shaped for the Revell kit.
In stock
19.56 €
Dead DesignVM481311:48

1:48 Nakajima Ki-27 Nate National Insignia paint masks

1:48 Nakajima Ki-27 Nate National Insignia paint masks is a set of paint masks for spraying the national insignia onto models of the Ki-27 aircraft in 1:48 scale. The name itself says that these are masks for spraying, not decals.
In stock
7.16 €
Zimi ModelZM350421:35

1:35 People's Liberation Army ZBD-04A IFV

The ZBD-04A in 1:35 scale is a plastic kit of a modern Chinese infantry fighting vehicle.
In stock
35.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.