1:35 German 75mm Barrel for Pak 40 - Late model

1:35 German 75mm Barrel for Pak 40 - Late model

12.76 €
Add to Cart
Aber Product Code: ABR35L025N ☆☆☆☆☆ Rate this product

1:35 German 75mm Barrel for Pak 40 - Late model

Aber – a turned metal barrel for the German 7.5 cm Pak 40 anti-tank gun, late version, 1:35 is a replacement part for a kit, not a standalone model. It replaces the plastic barrel with a part of a perfectly circular section and a drilled-out muzzle.

Scale1:35
Manufacturer Aber
Product EAN8591111000000

Responsibility details are not available.

12.76 €
10.55 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A turned barrel for the 7.5 cm Pak 40, late version, 1:35 (Aber)

This is neither a gun kit nor a complete model. It is a single replacement part: a barrel produced by machining on a lathe, which a modeler uses instead of the plastic barrel from the box. The manufacturer is the Polish company Aber, which has long specialized in turned barrels and fine accessories for 1:35 scale. The late version label refers to the later production form of the weapon; check the particular differences in shape against the earlier version before buying, because they vary between production series.

The real subject

The Pak 40 was a German anti-tank gun of 7.5 cm caliber used during the Second World War. It was a gun on a wheeled split-trail carriage, with a long barrel and a muzzle brake; its barrel also appears as the armament of a number of tracked carriers and tank destroyers. It is precisely the long slender barrel with the brake that is the most conspicuous feature on a model, which is why the quality of the workmanship shows on it most.

Why a metal barrel

A plastic barrel is made of two halves, so a mold seam always remains on it and has to be sanded down, and in sanding the roundness is easily spoiled. A turned metal part has no seam, is precisely cylindrical along its whole length and the muzzle is usually drilled out, so it does not look blanked off. Metal moreover takes handling and does not deform.

Fitting and painting

Cut the plastic barrel off at the point where it meets the breech and level the surface with a file. Bond the metal part with super glue or a two-part epoxy; ordinary cement for plastic does not hold on metal. Degrease the metal with alcohol or detergent before painting and apply a primer intended for metal, otherwise the paint cracks and peels. We recommend picking out the muzzle of the barrel and the brake gently at the end with a dark shade or with graphite.

Who it is for

  • Modelers who build artillery equipment in 1:35 scale
  • Builders bothered by the seam and the imprecise shape of a plastic barrel
  • A competition build where the detail of the muzzle and the accuracy of shapes are judged
  • Anyone who wants to improve an older mold without major intervention

This is an accessory to a model, not a standalone kit. The model, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a single replacement part, a barrel that replaces the plastic barrel in an existing kit in 1:35 scale.

With cyanoacrylate glue (super glue) or with a two-part epoxy. Cement for plastic will not join metal.

Yes. Degrease it with alcohol or detergent and apply a base coat intended for metal, otherwise the layer cracks and peels.

It is intended for models with the Pak 40 gun in 1:35 scale. Check how it meets a particular box, as the mounting differs between molds.

Last seen

AberABR35L025N1:35

1:35 German 75mm Barrel for Pak 40 - Late model

Aber – a turned metal barrel for the German 7.5 cm Pak 40 anti-tank gun, late version, 1:35 is a replacement part for a kit, not a standalone model. It replaces the plastic barrel with a part of a perfectly circular section and a drilled-out muzzle.
In stock
12.76 €
ŘOP o.s.F72/1101:72

1:72 Čs. Lehký objekt LO 37A - 140Z (diorama)

A resin kit of the Czechoslovak light fortification work LO 37A - 140Z (diorama) in 1:72 scale from the Czech manufacturer ROP, intended for experienced modelers.
In stock
30.76 €
PANZER ARTRE35-3851:35

1:35 Canvas cover for Kubelwagen Tamiya

PANZER ART canvas cover for the Kübelwagen 1:35 is a resin accessory for the canvas top of the light off-road car. This is a detail addition to the base kit, not a vehicle model.
In stock
11.56 €
Tetra Model WorksMA-350081:35

1/35 Russian T-90 Side skirts set for ZVEZDA

Photo-etched side skirts for the T-90 tank (1:35) from Tetra Model Works. It is not a model but a set of photo-etched side covers for the running gear, for refining a plastic kit of the tank. Meant for the Zvezda kit.
In stock
15.16 €
Black Dog modelBDT351501:35

1:35 M-ATV WINT-T A with equip.accessories set

1:35 M-ATV WINT-T A with equip.accessories set is a resin accessory set from the Czech brand Black Dog for a model of the American mine-resistant M-ATV vehicle in a signals configuration.
In stock
19.96 €
LP ModelsLP-480681:48

1:48 MIRAGE F.1 LADDER

A boarding ladder for a model of the Mirage F.1 aircraft in 1:48 scale. An accessory for a model on a base and for a scene with the canopy open.
In stock
7.56 €
TamiyaTA242791:24

1:24 Porsche 911 Turbo

The Porsche 911 Turbo is an injection-molded plastic model of the German sports car in 1:24 scale from Tamiya. The model is supplied unassembled and unpainted.
In stock
25.56 €
Fine ArtFA-657

Airbrush Holder FA-657 uchyt HS-H67

The Fine Art airbrush holder is a bench stand for setting an airbrush down, which keeps it in a stable and safe position during work.
In stock
4.76 €
1:32 I-16 type 10 with Chinese pilots-25 %Stock ClearanceFavorite
ICMICM320081:32

1:32 I-16 type 10 with Chinese pilots

ICM 1:32 I-16 type 10 with Chinese pilots is an injection-molded plastic kit of the Soviet I-16 fighter, a cantilever low-wing monoplane, with figures of Chinese pilots added. A large scale and fine detail.
9 leftof 11
52.36 €39.28 € You save 13.08 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.