1:35 German Pz.Kpfw.III/IV auf Einheitsfahrgestell

1:35 German Pz.Kpfw.III/IV auf Einheitsfahrgestell

27.28 €
Add to Cart

1:35 German Pz.Kpfw.III/IV auf Einheitsfahrgestell

Pz.Kpfw. III/IV auf Einheitsfahrgestell is a plastic kit of a German vehicle on the unified chassis in 1:35 scale from Hobby Boss. It is supplied unassembled and unpainted.

Scale1:35
Manufacturer Hobby Boss
Product EAN8591111000000

Responsibility details are not available.

36.36 € 27.28 €
22.55 € without VAT
−25 % You save 9.08 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Pz.Kpfw. III/IV auf Einheitsfahrgestell in 1:35 scale from Hobby Boss

The plastic kit in 1:35 scale captures a vehicle built on the so-called unified chassis, which was to standardize the production of vehicles derived from the Pz.Kpfw. III and Pz.Kpfw. IV types. The maker is Hobby Boss. The model is supplied as a classic injection-molded kit; the contents of the package and the number of parts are given in the instructions inside the box.

The real subject

The designation Einheitsfahrgestell, that is unified chassis, describes the effort to simplify wartime production by putting various superstructures on one common running gear. The designers drew on components of both established medium tanks and combined them into a single platform: the running gear, the gearbox and the engine section were to be shared, and only the upper part of the vehicle was to change. The practical aim was to shorten production time and to simplify the supply of spare parts. A number of vehicles conceived this way got no further than a prototype or a project, which is also why they are an interesting subject for modelers today — other variants of the same chassis, differing in the superstructure, are released separately as well.

Building and painting tips

Try the running gear dry first: the road wheels, the return rollers and the idlers have to sit in one plane, otherwise the model will not stand straight on its base. Assemble and fit the tracks before you varnish the hull, so that you do not have to get a brush into tight places later. Glue with thin cement for polystyrene, sand the seams and cover the whole model with primer before painting. Apply the paint with an airbrush in thin layers, a dark wash will bring out the rivets and the production seams, and dust pigments on the running gear and the lower hull will give the vehicle a sense of scale. If you are building the vehicle for a display case without a base, hinting at dust is enough; a diorama calls for more pronounced mud.

Who the model is for

  • Modelers who collect German tracked subjects in 1:35 scale
  • Anyone interested in prototypes and design programs that came to nothing
  • Diorama builders looking for a less usual vehicle
  • More advanced beginners with experience of gluing tracks

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Unified chassis. It was an effort to put various superstructures on one common running gear and so to simplify both production and the supply of spare parts.

It is a kit. The parts are nipped off the sprues, glued and painted. Glue, paints and a base are not included in the package.

The number of parts and the color schemes offered are in the instructions inside the box.

With basic experience, yes. The most demanding part tends to be the running gear and the tracks — it pays to put them together dry first.

Last seen

1:35 German Pz.Kpfw.III/IV auf Einheitsfahrgestell-25 %Stock ClearanceFavorite
Hobby BossHB801501:35

1:35 German Pz.Kpfw.III/IV auf Einheitsfahrgestell

Pz.Kpfw. III/IV auf Einheitsfahrgestell is a plastic kit of a German vehicle on the unified chassis in 1:35 scale from Hobby Boss. It is supplied unassembled and unpainted.
9 leftof 10
36.36 €27.28 € You save 9.08 €
DEF ModelDS480151:48

1:48 F-86D Sabre dog JASDF TACAN antenna set

F-86D Sabre Dog JASDF TACAN antenna set 1:48 is a resin upgrade set from DEF Model that adds the antenna and details to a model of the jet fighter. It is an accessory for the build, not an airplane model.
In stock
9.16 €
XtradecalX721651:72

1:72 RAF Post War Red/Blue Tactical Roundels. 10 Roundel sizes, 4 Tail fin stripe sizes.

1:72 RAF Post War Red/Blue Tactical Roundels is an Xtradecal decal sheet with post-war British national roundels in the red and blue form and with stripes for the vertical tail.
In stock
7.16 €
PolákPOL9814

Lesní porost - varianta D 27,5x20,5 cm

Forest growth - variant D (27.5x20.5 cm) is ready-made scenic foliage from the Czech manufacturer Polak for creating forest undergrowth and greenery on dioramas and layouts.
In stock
18.76 €
OmaskOMK748101:48

1:48 P-51D Mustang wheel bay plugs (for Eduard)

Omask masking plugs for the landing gear bays of the P-51D Mustang (1:48) are shaped plugs that fit into the landing gear bays of a P-51D model in 1:48 scale (the Eduard kit) and protect them during spraying. It is an accessory, not a model.
In stock
3.20 €
Kits-WorldKW3D1240161:24

1:24 Printed Racing Harness Decals Takata Race 4-Snap Harness (Green)

Printed racing seat belts in 1:24 scale with Takata markings, in a four-point version and in green. An accessory for the interior of a car model.
In stock
11.16 €
MASTERAM720831:72

1:72 Folland Gnat T.1 - Pitot Tube

A turned metal pitot tube for the Folland Gnat T.1 model in 1:72 scale from the Polish maker MASTER . It is not an aircraft kit but an accurate metal accessory that replaces the fragile plastic part on the nose.
In stock
3.96 €
ETA dioramaETA471:35

1:35 Army store - furniture for modern weapons

1:35 Army store - furniture for modern weapons is a printed paper accessory for a diorama in 1:35 scale with the motif of the interior fittings of a gun shop. It is not a plastic model or a waterslide decal, but a printed sheet from which you cut the parts out and glue them into a scene.
In stock
9.96 €
DN ModelsDN32/827-0101:32

1:32 Camouflage Paint Masks For F-16 Blizzard Aggressor

1:32 Camouflage Paint Masks For F-16 Blizzard Aggressor is a set of three sheets for the light winter aggressor scheme of the American Fighting Falcon.
In stock
31.96 €
Hobby DesignHD03-03481:18

1:18 19inch ADV 5.1 Wheels (4 resin wheel rims)

Four resin ADV 5.1 rims in 1:18 scale from Hobby Design in the 19-inch size. Replacement wheels for a build, not a kit of a car.
In stock
27.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.