1:35 GERMAN WEHRMACHT JERRY CANS

1:35 GERMAN WEHRMACHT JERRY CANS "WKO", 1943, PATTERN, WITH POURING TUBE, 10 PSC.

9.96 €
Add to Cart

1:35 GERMAN WEHRMACHT JERRY CANS "WKO", 1943, PATTERN, WITH POURING TUBE, 10 PSC.

German Wehrmacht jerrycans, WKO, 1943 pattern, with a pouring tube, 1:35 is an accessory set from the brand Elefant: 10 miniature twenty-liter jerrycans with the WKO marking after the pattern of 1943, in the version with a pouring tube fitted. It is not a model of a vehicle but a fitting for completing kits and dioramas.

Scale1:35
Manufacturer ELEFANT
Product EAN8591111000000

Responsibility details are not available.

9.96 €
8.23 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

German Wehrmacht jerrycans, WKO, 1943 pattern, with a pouring tube, 1:35

A set of 10 miniature twenty-liter jerrycans in 1:35 scale from the brand Elefant. It is not a model of a vehicle but an accessory meant for completing kits of military vehicles and for filling dioramas and vignettes. This variant carries the WKO marking on the shell and corresponds to the pattern of 1943; the cans are made with a pouring tube fitted. They suit the can holders on fenders, the beds of vehicles and loose placement on the ground.

The real subject

The German twenty-liter can, commonly called the jerrycan, was among the most widespread containers for carrying fuel and water. Its recognition features are three handles side by side, thanks to which one or two people could carry the container, and the cross-shaped ribbing pressed into the sides, which strengthened the shell and left the contents room to expand. The closure was done with a folding lever, so it opened without tools. The individual production batches differed in the stamp on the shell, in the year of the pattern and in small points of the closure; it is precisely these details that set the items of the whole line apart.

Building and painting tips

Separate the parts carefully from the casting gates and sand the remains with fine sandpaper. Do not round the sharp edges of the handles and the ribbing off while doing so, as they carry the whole impression of the casting. Depending on whether it is injection-molded plastic or resin, reach for liquid modeling cement or for super glue. Wash resin parts in lukewarm water with dish soap before painting and sand with respiratory protection. Paint over a thin coat of primer, otherwise the paint holds badly on a smooth surface. Credibility is helped by a dark wash into the ribbing and around the handles, dry brushing of the edges and fine scuffs with pigment; chipped paint and rusty traces around the closure look natural.

Who the set is for

  • modelers building German Second World War vehicles in 1:35
  • makers of dioramas and vignettes where small equipment and load are missing
  • builders who want to replace the coarser jerrycans from a kit
  • collectors who tell the individual production patterns and stamps apart

The set is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is an accessory set of miniature jerrycans in 1:35 scale that a modeler adds to a kit of a military vehicle or to a diorama. The vehicle itself has to be obtained separately.

According to the name it is 10 pieces in one package. Further details of the contents are stated on the box.

They are details from the name that set the individual items of this line apart. WKO refers to the stamp on the shell of the can and the year to the pattern of that production period, thanks to which the equipment of a vehicle can be matched to the period being built.

The material of the parts is stated on the box of the set. The method differs: injection-molded plastic is glued with liquid modeling cement, resin parts with super glue, and before painting they are washed free of the remains of mold release agent.

They are not. The set is supplied unassembled and unpainted, and glue, paints and other accessories are not included in the package, unless stated otherwise.

Last seen

ELEFANTELE352211:35

1:35 GERMAN WEHRMACHT JERRY CANS "WKO", 1943, PATTERN, WITH POURING TUBE, 10 PSC.

German Wehrmacht jerrycans, WKO, 1943 pattern, with a pouring tube, 1:35 is an accessory set from the brand Elefant: 10 miniature twenty-liter jerrycans with the WKO marking after the pattern of 1943, in the version with a pouring tube fitted. It is not a model of a vehicle but a fitting for completing kits and dioramas.
In stock
9.96 €
Hobby DesignHD03-02541:24

1:24 19inch ADV.1 15M.V2 Wheels (4 Resin Wheels + Metal Air Valves)

Hobby Design 1:24 ADV.1 15M.V2 wheels are replacement rims with a spoke drawing of their own for builds of modern cars.
In stock
15.16 €
Quinta StudioQP+240101:24

1:24 Southwestern US License Plates 1940-1950 with Metal Base (for All Kits)

1:24 US license plates: the southwestern states 1940-1950 with a metal base (Quinta Studio) is a set of 3D printed decals of historic American license plates with a metal base for car models in 1:24 scale. A universal accessory for all kits.
In stock
10.36 €
Star DecalsSD35-C12721:35

1:35 Balkan WW2 # 3. German anti-partisan operations in Yugoslavia and Albania.

Balkan WW2 No. 3 - German anti-partisan operations (1:35) is a set of waterslide decals from Star Decals with the markings of German vehicles in anti-partisan operations in Yugoslavia and Albania.
In stock
8.36 €
Quinta StudioQDS+322801:72

1:72 Tornado Gr.1 3D-Printed & coloured Interior on decal paper (Italeri) (Small version)(with 3D-printed resin parts)

Quinta Studio 1:72 Tornado Gr.1 cockpit interior (3D decal, small version with resin parts) is a colored 3D-printed cockpit interior for the British Panavia Tornado Gr.1 combat aircraft in 1:72 scale, in the small version rounded out with 3D-printed resin parts. The target kit is Italeri.
In stock
48.36 €
Quinta StudioQD483901:48

1:48 Macchi C.202 Folgore Late 3D-Printed & coloured Interior on decal paper (Hasegawa/Eduard)

Quinta Studio 1:48 Macchi C.202 Folgore Late: a 3D-printed colored interior is an add-on set for bringing out the interior of a plastic model in 1:48 scale. It is not a kit of an aircraft. Target kits: Hasegawa and Eduard.
In stock
23.56 €
EduardFE15671:48

1:48 Bell P-400 Airacobra - Steel Seat Belts for Arma Hobby

Eduard 1:48 Bell P-400 Airacobra, steel seat belts are belts of etched steel printed in color for the seat in the P-400 fighter kit from Arma Hobby.
In stock
6 €
Pimp My Miniatures16s-0091:16

1:16 Gun travel lock for Panther tank (final DB ver & ausf. F hull)

The late shape of the gun travel lock for the Panther with the Ausf. F hull in 1:16 scale corresponds to the final rendition by Daimler-Benz. A separate component for modifying a large-scale model.
In stock
9.16 €
Voyager ModelPE357351:35

1:35 WWII British AEC Matador truck mid version (For AFV CLUB AF35239)

Brass photo-etch for the British AEC Matador truck 1:35 (mid version) from Voyager Model. A brass photo-etched detail set to raise the fidelity of the model; it is not a kit of the vehicle but an accessory.
In stock
21.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.