Photo-etched engine compartment grilles for the German project tanks Standardpanzer E-75 and E-50 in 1:35 scale from the manufacturer Aber. Pierced metal parts replace the solid plastic covers of the cooling openings.
Responsibility details are not available.
A photo-etched detail set in 1:35 scale from the Polish manufacturer Aber for models of the German project tanks Standardpanzer E-75 and E-50. It holds the grilles of the covers of the engine compartment cooling vents. This is not a kit of a vehicle but an accessory with which the plastic parts are replaced.
The Entwicklung series was to replace the fragmented German production of armored vehicles with a few standardized types sharing common components. The E-50 was to follow on from the medium and heavy tanks of the Panther category, and the heavier E-75 from the King Tiger. Neither of them reached the prototype stage, so they are built from project documentation as so-called paper panzers.
Sand the solid plastic covers back to a frame and glue the photo-etched part in with cyanoacrylate glue at small points. Make the bends in a bending tool, degrease the metal before painting and give it a base coat for metals. Because the real subject has no documented original finishes, you have a free hand in choosing both camouflage and weathering. A dark surface under the grille emphasizes the depth of the piercing.
This is a detail accessory, not a complete model. Glue, paints and the base kit are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
