1:35 M3 Lee (late production) - 75mm M3 L/40 (long) & 37mm M6 gun barrels (for Takom kit)

1:35 M3 Lee (late production) - 75mm M3 L/40 (long) & 37mm M6 gun barrels (for Takom kit)

9.96 €
Add to Cart

1:35 M3 Lee (late production) - 75mm M3 L/40 (long) & 37mm M6 gun barrels (for Takom kit)

Turned metal barrels of the 75 mm M3 L/40 and the 37 mm M6 for the M3 Lee tank of late production in 1:35 scale from the Polish manufacturer MASTER are cut for the kit from the manufacturer Takom.

Scale1:35
Manufacturer MASTER
Product EAN8591111000000

Responsibility details are not available.

9.96 €
8.23 € without VAT
8 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

M3 Lee late production – metal barrels of the 75 mm M3 and the 37 mm M6, 1:35 (MASTER)

This is not a kit of a tank but a metal detailing accessory for a model in 1:35 scale. The set contains turned brass barrels of the long gun of 75 mm caliber of the M3 type with a length of 40 calibers and of the turret gun of 37 mm caliber of the M6 type. The set is cut for the kit from the manufacturer Takom; a version with the same contents for a kit from another manufacturer is sold separately as well, so go by which kit you have. A long metal barrel holds a straight axis and has a hollow muzzle; it is precisely with longer barrels that the sag of a plastic part shows most.

The real subject

The M3 Lee was an American medium tank of the beginning of the 1940s with its main gun of 75 mm caliber in the right-hand part of the hull and a smaller gun of 37 mm caliber in a rotating turret. The later production series received the longer 75 mm M3 gun with a length of 40 calibers, which had a higher muzzle velocity than the original short M2 weapon. A number of other details of the hull and the turret also differed according to the production series chosen, so it pays to choose accessories according to the particular form you are building.

Fitting and tips

Cut the plastic barrel off as close to the mounting block as possible, level the area and clean the hole out with a drill bit, so that the metal part sits on the axis without being forced. Glue with cyanoacrylate glue (super glue) drop by drop applied with a toothpick; ordinary cement for plastic does not work on metal. Degrease the metal with alcohol before painting and spray it with a primer. Glue the long barrel on only once the hull is finished, so that it is not damaged during the build, and darken the muzzle at the end with a thin wash or with pigment.

Who the set is for

  • Builders of the late versions of the American M3 tank in 1:35 scale
  • Modelers who are bothered by a sagging plastic barrel with a mold seam
  • Owners of the corresponding kit from the manufacturer Takom
  • More experienced modelers working with super glue and fine tools

This is an accessory, not a model of a tank. The base kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

For the kit of the M3 tank from the manufacturer Takom. A variant of the same set for a kit from another manufacturer also exists, so go by this information.

This set contains the longer 75 mm M3 gun with a length of 40 calibers, which the later production series carried. The early machines had the shorter M2 weapon.

No, these are only two turned metal barrels that replace the plastic parts on a model you have already bought.

Glue for plastic joins parts by melting the surface, which does not work on metal. Cyanoacrylate creates a firm joint between metal and plastic.

Last seen

MASTERGM350321:35

1:35 M3 Lee (late production) - 75mm M3 L/40 (long) & 37mm M6 gun barrels (for Takom kit)

Turned metal barrels of the 75 mm M3 L/40 and the 37 mm M6 for the M3 Lee tank of late production in 1:35 scale from the Polish manufacturer MASTER are cut for the kit from the manufacturer Takom.
In stock
9.96 €
Zimi ModelTC3D0451:35

1:35 Stryker M1296 - 3D-Printed Tire with Snow Traction Chains (for Zimi Model / AFV Club and RFM Kits)

1:35 Stryker M1296 - 3D-Printed Tire with Snow Traction Chains is a 3D printed set of wheels with snow chains for the kit of the Stryker M1296 wheeled carrier in 1:35 scale. It is a detail accessory, not a model.
In stock
32.76 €
AberABR35L2701:35

1:35 German 8,8cm One part Pak 43/3 L/71 barrel for Jagdpanther Ausf G1 early

The turned one-piece Aber 1:35 barrel of 8.8 cm Pak 43/3 L/71 caliber is a metal replacement for the plastic barrel of a model of the Jagdpanther tank destroyer in the G1 early production version. It is an accessory, not a model.
In stock
14.76 €
Quinta StudioQD+485541:48

1:48 Bristol Beaufighter Mk.VI 3D-Printed & coloured Interior on decal paper (Tamiya) (with 3D-printed resin parts)

Bristol Beaufighter Mk.VI 3D interior with resin parts (1:48) from Quinta Studio is a colored 3D decal set supplemented with 3D-printed resin parts for a detailed cockpit of the Beaufighter Mk.VI model in 1:48 scale. The set is intended for the Tamiya kit.
In stock
35.16 €
AberABR35L2361:35

1:35 Armament for T10 Heavy Tank 1x122 mm D-25TA, 1x12,7 cm Coaxial DShK

Armament for the T-10 heavy tank in 1:35 scale from Aber: a turned barrel of the 122 mm gun and a coaxial machine gun. It is not a kit.
In stock
15 €
Star DecalsSD35-C12751:35

1:35 German Funklenk tanks # 4. Demolition and control tanks in German Funklenk / Fkl. units.

Star Decals 1:35 German Funklenk tanks 4 is a decal set for marking German demolition carriers and the control tanks of the Funklenk units, Fkl. for short.
In stock
7.16 €
AberABR35L1011:35

1:35 Set of 2 barrels for machine guns ZB 37 used on Pz.35/38(t) tanks

A set of 2 turned metal barrels for the ZB 37 machine guns of the Pz.35(t) and Pz.38(t) tanks in 1:35 scale from the manufacturer Aber. An accessory that replaces the plastic barrels in a kit.
In stock
15.96 €
Voyager ModelPE357101:35

1:35 WWII US M4A3E8 Sherman Fenders/Track Cover (For TAMIYA 25175)

Brass photo-etched fenders and track covers for the M4A3E8 Sherman tank 1:35 from Voyager Model. A brass photo-etched detail set to raise the fidelity of the model; it is not a kit of the vehicle but an accessory. The set is intended for the Tamiya 25175 kit.
In stock
14.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.