Resin open tool clamps for German vehicles, type 1, 1:35 scale — separate brackets for the hull, not a kit of the vehicle.
Responsibility details are not available.
Small resin castings of tool brackets hinged into the open position. According to the name this is type 1, that is one of several forms that occurred side by side on vehicles. The set replaces a detail on the hull; it is not a model of the vehicle.
There is a whole series of clamps on one machine and they are not the same: a shorter one holds a shovel, a longer one a crowbar or a wrench, the catch on a jack is arranged differently. Different types are therefore sold separately and it makes sense to choose the one that suits the place where you need it. On a model it is a detail that carries the view of the upper surfaces of the hull — exactly where everyone who sees the model from standing height looks. In injection-molded plastic the clamp is merged with the tool and with the hull; if you want to open it, you have to carve it out and make it again. A resin casting skips that step and in 1:35 offers a strap thickness you could not make from plastic by hand.
First wash the castings in warm water with detergent so that a primer will hold. Separate them from the frame with a new blade and a drawing motion and sand the remainder back with a fine file. On the hull, cut off the original clamps with their tools and level the area so that the new clamp seats without a gap. Glue with a spot of gel cyanoacrylate applied with a pin. You will make the work easier if you first mark the position with a pencil following the original parts.
The accessory is supplied unpainted. Glue, paints, tools and the base kit are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!