1:35 Russian 2S1 Self-propelled howitzer - Trumpeter

1:35 Russian 2S1 Self-propelled howitzer - Trumpeter

7.56 €
Add to Cart

1:35 Russian 2S1 Self-propelled howitzer - Trumpeter

The Quickwheel 1:35 2S1 self-adhesive masking set for the road wheels of the Soviet self-propelled howitzer is cut for the kit from Trumpeter. It sets the border between the rubber tire band and the rim during painting.

Scale1:35
Manufacturer Quickwheel
Product EAN8591111000000

Responsibility details are not available.

7.56 €
6.25 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:35 2S1 self-propelled howitzer wheel masking set (Quickwheel)

A set of self-adhesive masks for painting the road wheels of the Soviet 2S1 self-propelled howitzer in 1:35 scale. It is not a kit or an extra part — the masks merely cover part of the wheel so the rubber and the rim can be sprayed separately and with a sharp border. The set is cut for the kit from Trumpeter; with a kit from another manufacturer the wheels may have a different diameter and a different rim depth, so check that this is the model you are building.

What is special about the running gear of the 2S1

The running gear of the 2S1 derives from an amphibious tracked chassis, and that is the essential thing about it: there are seven road wheels on each side and no return rollers, with the upper run of the track bearing directly on the wheels. Seven wheels per side side by side means very narrow gaps — a brush can barely be maneuvered between the individual wheels, and that is exactly the situation in which lining by hand ends in a smear on the neighboring wheel. The wheels are also of light construction for the sake of buoyancy, so they have a markedly divided rim on which every overrun of paint shows. The drive sprocket is at the front, the idler wheel at the rear.

What the mask prevents

On a vehicle with seven wheels per side the small inaccuracies add up: fourteen hand-lined tire bands mean fourteen lines of differing width. The second typical mistake is painting the wheels once they are already glued to the hull — there is no room between them and neither a brush nor the nozzle of an airbrush gets into the gaps. The third is impatience when sticking the mask down: lay it on without pressing it all the way around and paint bleeds under the edge, leaving the border ragged. A mask will not abolish those problems for you, but it moves them out of the realm of a steady hand and into the realm of careful preparation — and that is repeatable.

Who the set is for

  • Builders of Soviet and post-Soviet equipment in 1:35
  • Modelers put off by a high number of wheels on one vehicle
  • Those who want every wheel the same regardless of how the day is going
  • Airbrush users painting the running gear away from the hull

This is a masking aid, not a model. Neither paints nor the kit are included in the package. Go by the details on the box for the contents of the sheet.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Because it has seven road wheels on each side and no return rollers. The wheels are close together, a brush gets between them with difficulty, and fourteen hand-lined tire bands almost never come out the same.

We do not recommend it without a dry trial. The set is cut for the particular kit from Trumpeter and the wheels of another kit may have a different diameter.

Press the mask down all the way around once it is on and spray in thin coats square to the surface. A heavy coat laid on at an angle gets under the edge most easily.

Last seen

QuickwheelQW-1561:35

1:35 Russian 2S1 Self-propelled howitzer - Trumpeter

The Quickwheel 1:35 2S1 self-adhesive masking set for the road wheels of the Soviet self-propelled howitzer is cut for the kit from Trumpeter. It sets the border between the rubber tire band and the rim during painting.
In stock
7.56 €
PANZER ARTRE35-7721:35

1:35 US Army Air Force 5gal Fuel Canisters (12pcs)

PANZER ART 1:35 US Army Air Force fuel canisters, 5 gallons (12 pcs) is a resin set of containers to enrich dioramas and models.
In stock
10.76 €
FLEX-I-FILEFF6051

Aplikátor One-drop s pružnou trubičkou

A glue applicator with a flexible tube, which lets you place a single drop exactly where it is needed, even in a place that is hard to get at.
In stock
7.16 €
Vespid ModelsVS7200351:72

1:72 US Buffalo Mine Protected Clearance Vehicle MPCV

The 1:72 US Buffalo Mine Protected Clearance Vehicle MPCV is a plastic kit of the American mine clearance vehicle from Vespid Models with 3D-printed parts and photo-etch.
In stock
22.36 €
LP ModelsLP-720381:72

1:72 SU-27UB LADDER (LATE VER.)

A boarding ladder for the two-seat Su-27UB in the late version, 1:72 scale , is a resin accessory to a finished model, not a kit of the aircraft.
In stock
11.96 €
New WareNWAM03901:72

1:72 Mask F-15E EXPERT (ACAD 12550)

New Ware 1:72 Mask F-15E EXPERT is a set of precisely cut self-adhesive masks for painting a model of the two-seat combat aircraft F-15E in 1:72 scale.
In stock
7.16 €
Kits-WorldKW481701:48

1:48 orthrop P-61A-10/B-6 Black Widow

Decals 1:48 for six P-61 Black Widow night fighters of five squadrons, from China, France, the Philippines and postwar Germany.
In stock
13.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.