1:35 WWII German KING TIGER (Porsche Turret)

A photo-etched set for a model of the German Tiger II heavy tank with the early Porsche turret in 1:35 scale from E.T. Model. Thin metal parts replace the plastic fenders, grilles and brackets.

Scale1:35
Manufacturer E.T. Model
Product EAN8591111732567

Responsibility details are not available.

31.16 €
25.75 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Tiger II with the early turret 1:35: photo-etched set (E.T. Model)

An accessory set of photo-etched metal parts for a model of the German Tiger II heavy tank of the Second World War, in the version with the early turret, for which the name Porsche turret has taken hold among modelers. The set replaces the plastic parts where their thickness is most visible: the fenders and their brackets, the grilles over the engine bay, the tool holders and the small external equipment. It is not a kit of the tank but an addition to a plastic model.

The real subject

The Tiger II, also known as the Königstiger, was the heaviest German tank put into series service in the Second World War. It carried an 88 mm gun with a long barrel and heavily sloped frontal armor. The first fifty or so vehicles received a turret with a rounded front and a bulged side, which modelers refer to as the Porsche turret. Its drawback was a shot trap under the barrel, which the later turret with a flat front did away with. The different shape of the turret is the main recognition feature according to which a model is built, which is why this set too is listed separately for the early version.

Building and painting tips

The photo-etched fenders are thin, so you can bend them, tear them or partly remove them and thus suggest damage from use, which is entirely typical of heavy German vehicles. Cut the parts out with a scalpel and make the bends in a bending tool. They are glued with cyanoacrylate glue in a minimal amount. Apply a primer before painting. A three-color camouflage over a dark yellow base suits the vehicle. Soften the transitions between the patches with an airbrush, then unify the surface with a filter and emphasize it with a wash in the recesses. Finish with mud and dust on the tracks and the lower part of the hull.

Who the set is for

  • Builders of German Second World War equipment in 1:35 scale
  • Modelers building the early version of the Tiger II with the rounded turret
  • Competition and display-case builds with an emphasis on thin sheet
  • More experienced modelers with basic photo-etch tools

This is an accessory set, not a kit of the tank. The base model, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The established modeling name for the early Tiger II turret with a rounded front and a bulged side. Only the first fifty or so vehicles received it; later ones had a turret with a flat front.

The set is listed for the version with the early turret. The hull parts largely overlap, but the turret parts correspond to the early form.

No, it is an accessory photo-etched set for a plastic model in 1:35 scale.

Yes, that is precisely their advantage. Thin metal can be bent, cut into or partly removed, which cannot be done faithfully in plastic.

Last seen

E.T. ModelE35-0331:35

1:35 WWII German KING TIGER (Porsche Turret)

A photo-etched set for a model of the German Tiger II heavy tank with the early Porsche turret in 1:35 scale from E.T. Model. Thin metal parts replace the plastic fenders, grilles and brackets.
In stock
31.16 €
PeewitPWM721551:72

1:72 Reggiane Re.2001 (designed to be used with Sword kits)

The Peewit 1:72 Reggiane Re.2001 masking set is a self-adhesive set of masks for cleanly spraying the canopy frames of the Italian fighter in 1:72 scale.
In stock
3.96 €
OmaskOMK748081:48

1:48 Fw 190 A-2/3/4 wheel bay plugs (for Eduard)

A set of foam masking plugs, Omask landing gear bay plugs for the Fw 190 A-2/3/4 1:48 . They fill the openings of the wheel bays so that paint does not get into them while spraying.
In stock
3.20 €
Copper State Models CSMF35-0601:35

1:35 British Dispatch Rider With A Basket Of Pigeons

A British soldier carrying a wicker basket with carrier pigeons. A single figure in 1:35 scale for scenes of the signal service.
In stock
13.56 €
MH modelsMHX481231:48

1:48 Focke-Wulf Ta-154 canopy airbrush mask

Focke-Wulf Ta-154 canopy 1:48 (MH Models) is a set of self-adhesive painting masks for a clean spray job on the canopy framing of a model of the German Focke-Wulf Ta-154 night fighter.
In stock
5.16 €
AcademyAC124751:72

1:72 F-117A The Ghost of Baghdad

Injection-molded plastic kit of the Lockheed F-117A Nighthawk in 1:72 scale from Academy - the American stealth attack aircraft in the Ghost of Baghdad edition.
In stock
17.16 €
PlusmodelPMO1371:35

1:35 Dlažební kostky velké - pískovec

Paving setts of the large format in a sandstone version, made by a new technology. They cover an area of roughly 15 x 10 cm.
In stock
10.76 €
LifecolorLIFCS57

CS57 - Die Luftstreitkräfte Imperial German Army WWI Set - Acrylic paint set

A Lifecolor paint set for the subject of the German air service of the First World War. A matched palette for building biplanes and triplanes, acrylic according to the name.
In stock
19.96 €
Artwox ModelAW20043A1:700

1:700 IJN Yamato Wooden Deck (Black Deck) (for Fujimi kit 421506)

A veneer deck for the battleship Yamato in a dark finish in 1:700 scale from Artwox Model is a variant of the wooden deck with a markedly darkened shade of the planks.
In stock
14.36 €
AberABR351501:35

1:35 German Nebelkraftwagen Sd.Kfz. 11/4 - vol. 2 - additional set - ammo boxes

A photo-etched detail set, Nebelkraftwagen Sd.Kfz. 11/4 - vol. 2, add-on set (ammunition boxes) , in 1:35 scale from Aber. A metal accessory for a more accurate build, not a standalone model.
In stock
29 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.