1:48 Lockheed TF-104G Starfighter TFace

The self-adhesive masking set Eduard Lockheed TF-104G Starfighter TFace in 1:48 scale, cut from kabuki tape. An accessory for a kit, not a model.

Scale1:48
Manufacturer Eduard
Product EAN8591111000000

Responsibility details are not available.

9 € 6.76 €
5.59 € without VAT
−25 % You save 2.24 €
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Eduard 1:48 Lockheed TF-104G Starfighter TFace - masks for both sides of the glazing

A set of precisely cut self-adhesive masks from the Czech maker Eduard for a model of the Lockheed TF-104G Starfighter TFace in 1:48 scale. The masks are cut from kabuki tape, that is, from a fine Japanese masking tape that holds well even on slightly curved surfaces, forms no capillary for paint to run under the edge and leaves no adhesive on the clear parts once it is taken off. This is neither a kit nor a finished model but an accessory that shortens the most tiresome part of the build.

The real subject

The TF-104G was the two-seat training version of the fighter aircraft Lockheed F-104G Starfighter. The lengthened cockpit with two seats one behind the other means a longer canopy with a framing of its own. The type kept the slender fuselage, one jet engine and the thin trapezoidal wing of small span. With European users it served mainly for training and for keeping pilots current.

Use and tips

The designation TFace means that the set holds masks for the outer and the inner side of the glazing alike. The frames thereby take on the right color even seen from inside the cockpit, which with large glazing in 1:48 scale is plainly apparent when the canopy is open. The procedure has two phases. First stick the inner masks on, spray the shade of the interior, then glue the part into the fuselage, apply the outer masks and spray the camouflage or the metal. Take the inner mask off only at the very end, as it protects the glazing during the final varnishing too.

Who the set is for

  • Modelers who want to finish a model with the canopy open
  • Builders who are bothered by frames of the wrong color showing through from inside
  • More experienced modelers willing to mask in two phases
  • Builders of two-seat Starfighters in 1:48 scale

This is an accessory for a kit. The kit, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The set holds masks for the outer and the inner side of the glazing, so the frames are the right color from inside as well.

When you are building a model with the canopy open or want a cockpit interior that is clean to look at.

No, this is an accessory. The kit has to be bought separately.

The inner ones first, and spray the interior, then the outer ones and spray the outer finish. Take the inner mask off last.

Last seen

1:48 Lockheed TF-104G Starfighter TFace-25 %Stock ClearanceFavorite
EduardEX7391:48

1:48 Lockheed TF-104G Starfighter TFace

The self-adhesive masking set Eduard Lockheed TF-104G Starfighter TFace in 1:48 scale, cut from kabuki tape. An accessory for a kit, not a model.
3 leftof 5
9 €6.76 € You save 2.24 €
TamiyaTA73004

Display Case C 240x130x110mm

The Tamiya Display Case C measuring 240x130x110 mm - a clear protective box with a base for displaying a finished model and keeping the dust off it.
In stock
17.16 €
Aires/QuickboostQB484111:48

1:48 Yak-38 Forger A

An add-on set for a model of the Soviet Yak-38 Forger A carrier aircraft in 1:48 scale. The parts are not polystyrene and are bonded with super glue.
In stock
3.56 €
LACILAC1440551:144

1:144 LEAP-1A A320NEO TWO ENG

1:144 CFM LEAP-1A for the Airbus A320neo, two engines is a resin set of nacelles of the new engine generation. An accessory for a plastic kit, not a model of the aircraft.
In stock
21.96 €
PANZER ARTRE35-3461:35

1:35 Road wheels for Sd.Kfz 254

A resin set of road wheels for the Sd.Kfz 254 in 1:35 scale from PANZER ART. It is not a model of the vehicle but a detail accessory for raising the fidelity of a kit.
In stock
14.36 €
MASTERAM321281:32

1:32 F/A-18E/F Super Hornet & EA-18G Growler Angle of Attack Probes - Early Type

1:32 angle of attack sensors for the Super Hornet and the Growler, early type is a turned metal accessory that replaces the plastic sensors on the nose of a model.
In stock
5.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.